Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes

Sections

2

  • Battery
  • 3 steps
  • Keyboard
  • 2 steps

Flags

0

  • BackAcer Aspire E5-571P-55TL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide will explain how to replace the keyboard for the Acer E5-571P-55TL. Before performing actions in this guide be sure to power off your laptop and remove the power adapter.

What you need

Step 1

              Battery
  • Make sure that laptop is turned off.
  • Turn the laptop upside down with the battery facing you.

Make sure that laptop is turned off.

Turn the laptop upside down with the battery facing you.

1024

Step 2

  • Place the Spudger into the battery lock and slide it to the left until you hear the battery unlock.

Place the Spudger into the battery lock and slide it to the left until you hear the battery unlock.

Step 3

  • Pull the battery towards you to remove it from the laptop.

Pull the battery towards you to remove it from the laptop.

Step 4

              Keyboard
  • Using a Phillips #0 screwdriver, remove each of the eighteen 8 mm screws from the bottom of the laptop.

Using a Phillips #0 screwdriver, remove each of the eighteen 8 mm screws from the bottom of the laptop.

Step 5

  • Carefully place your fingers underneath the top of the keyboard just below the screen.
  • Pull upwards until you can hear the keyboard click out of place.
  • Continue around the entire laptop, carefully pulling the keyboard and palm rest assembly slightly from the frame to reveal the ribbon connectors.
  • Don’t pull the keyboard off the frame yet because it’s attached by ribbon connectors.
  • After the keyboard is detached, unplug each of the three ribbon cables and remove the keyboard and palm rest assembly.

Carefully place your fingers underneath the top of the keyboard just below the screen.

Pull upwards until you can hear the keyboard click out of place.

Continue around the entire laptop, carefully pulling the keyboard and palm rest assembly slightly from the frame to reveal the ribbon connectors.

Don’t pull the keyboard off the frame yet because it’s attached by ribbon connectors.

After the keyboard is detached, unplug each of the three ribbon cables and remove the keyboard and palm rest assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Melvin Baptista

Member since: 03/28/2022

135 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team B-1, Gurgel Spring 2022                        

                                                  Member of UMass Dartmouth, Team B-1, Gurgel Spring 2022 



                    UMASSD-GURGEL-S22SBG1                     


                                            4 Members                     


                                            6 Guides authored