Acer Aspire E5 574 53Qs Back Panel Removal Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Acer Aspire E5-574-53QS Back Panel Removal
4 steps

Flags

BackAcer Aspire E5-574-53QS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Acer Aspire  E5-574-53QS Back Panel Removal

Turn the laptop so that the back panel faces up.
Remove eighteen screws from the back cover using a Phillips #0 screwdriver.

Turn the laptop so that the back panel faces up.

Remove eighteen screws from the back cover using a Phillips #0 screwdriver.

1024

Step 2

Use a plastic opening tool to ease out the optical drive from the side of the laptop, then pull it the rest of the way out.
Remove the three screws along the edge of the optical drive port with a Phillips #0 screwdriver.

Use a plastic opening tool to ease out the optical drive from the side of the laptop, then pull it the rest of the way out.

Remove the three screws along the edge of the optical drive port with a Phillips #0 screwdriver.

Step 3

Stick an opening tool into the seam of the laptop case and begin prying the back panel from the device to loosen it. Slowly move all the way around the laptop, prying periodically to release each of the clips.
Do not completely remove it. Only loosen the connection between the back panel and the laptop. Be careful not to damage the VGA port, as that can easily get caught on the back panel during this step.
Lift the back panel up to reveal the cable connecting the back case to the motherboard.

Stick an opening tool into the seam of the laptop case and begin prying the back panel from the device to loosen it. Slowly move all the way around the laptop, prying periodically to release each of the clips.

Do not completely remove it. Only loosen the connection between the back panel and the laptop. Be careful not to damage the VGA port, as that can easily get caught on the back panel during this step.

Lift the back panel up to reveal the cable connecting the back case to the motherboard.

Step 4

Carefully remove the cable from the socket.
The socket is very sensitive, so be gentle when pushing the cable connector out.
Fully remove the back case from the device.

Carefully remove the cable from the socket.

The socket is very sensitive, so be gentle when pushing the cable connector out.

Fully remove the back case from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Rolf Konrad

Member since: 02/26/2020

159 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Alabama, Team S2-G1, Bedsole Spring 2020                        

                                                  Member of University of Alabama, Team S2-G1, Bedsole Spring 2020 



                    UA-BEDSOLE-S20S2G1                     


                                            4 Members                     


                                            1 Guide authored

Vladimir Hromis - Oct 16, 2020

I need to know what kind of screews go on that laptop because i bought one like this without screews. Model in question is E5 722G-302Y but i think they are similar enough .

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team