Difficulty

Moderate

Steps

4

Time Required

                          30 - 40 minutes

Sections

1

  • Keyboard
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAcer Aspire E5-575G-39HV

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Opening the back panel
  • Unscrew all 16 screws holding the back panel.
  • Open the HDD, SSD and RAM cover and unscrew all visible screws that hold the panel. Now is a good idea to upgrade those parts if you want.
  • Use a prying tool to separate the top and bottom pieces.

Unscrew all 16 screws holding the back panel.

Open the HDD, SSD and RAM cover and unscrew all visible screws that hold the panel. Now is a good idea to upgrade those parts if you want.

Use a prying tool to separate the top and bottom pieces.

1024

Step 2

              The insides.
  • Disconnect all visible connectors, starting with the battery (Yellow), they the other ones (Blue). After that remove the screws attaching the motherboard to the panel.
  • After that remove the black protective film, without damaging it. Now the keyboard should be revealed.

Disconnect all visible connectors, starting with the battery (Yellow), they the other ones (Blue). After that remove the screws attaching the motherboard to the panel.

After that remove the black protective film, without damaging it. Now the keyboard should be revealed.

Step 3

              Removing the display.
  • Remove the screws that hold the display hinges and detach the display.

Remove the screws that hold the display hinges and detach the display.

Step 4

              Removing the old keyboard.
  • Use a soldering iron with a big tip, to melt the plastic rivets that hold the metal case for the keyboard.
  • Use a prying tool the remove the metal case.
  • Remove the old keyboard, place the new one and dont forget to place the metal case on top of it.

Use a soldering iron with a big tip, to melt the plastic rivets that hold the metal case for the keyboard.

Use a prying tool the remove the metal case.

Remove the old keyboard, place the new one and dont forget to place the metal case on top of it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Simeon Brankov

Member since: 11/08/2020

3,455 Reputation

                                      41 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges