Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

  • Motherboard
  • 9 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

  • BackAcer Aspire E5-721-64T8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Motherboard
  • Remove the two 6mm J0 screws located in the right and left side of the battery.
  • Make sure to unplug of disconnect the power cable before removing the battery.

Remove the two 6mm J0 screws located in the right and left side of the battery.

Make sure to unplug of disconnect the power cable before removing the battery.

1024

Step 2

  • Remove the connector from the motherboard.

Remove the connector from the motherboard.

Step 3

  • Remove the two 6mm Phillips J0 screws located in the right and left side of heatsink mounts.
  • Remove the four 6mm Phillips J0 screws located on the heatsink power mount.
  • Lift and remove heatsink from motherboard completely.

Remove the two 6mm Phillips J0 screws located in the right and left side of heatsink mounts.

Remove the four 6mm Phillips J0 screws located on the heatsink power mount.

Lift and remove heatsink from motherboard completely.

Step 4

  • Remove wi-fi card by pulling from socket.

Remove wi-fi card by pulling from socket.

Step 5

  • Remove screen connector by pulling it upwards.

Remove screen connector by pulling it upwards.

Step 6

  • Remove speaker connector from the motherboard by pulling on the tab.

Remove speaker connector from the motherboard by pulling on the tab.

Step 7

  • Remove the four blue tabbed ribbon connectors to the motherboard by lifting white clamps and pulling out connector.

Remove the four blue tabbed ribbon connectors to the motherboard by lifting white clamps and pulling out connector.

Step 8

  • Remove black ribbon connector by lifting white clamp and pulling connector out.

Remove black ribbon connector by lifting white clamp and pulling connector out.

Step 9

  • Finally lift motherboard from narrow side and jiggle it out so all ports going through the laptop case on the left slide out.

Finally lift motherboard from narrow side and jiggle it out so all ports going through the laptop case on the left slide out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Ed Herrera

Member since: 01/25/2018

390 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S7-G3, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S7-G3, Passmore Spring 2018 



                    USFT-PASSMORE-S18S7G3                     


                                            4 Members                     


                                            6 Guides authored