Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
2
- Back Cover
- 2 steps
- Network Card
- 2 steps
Flags
0
BackAcer Aspire ES1-111M-C7DE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Unscrew the 13 6.2mm screws located on the bottom of the laptop using the JIS #0 screwdriver.
Unscrew the 13 6.2mm screws located on the bottom of the laptop using the JIS #0 screwdriver.
1024
Step 2
- Using a plastic opening tool, gently pry the lower case off. Place aside.
Using a plastic opening tool, gently pry the lower case off. Place aside.
Step 3
Network Card
- You will see a white rectangular piece next to the upper left-hand corner of the motherboard that is connected with a black cord and a white cord; this is the network card.
- Unscrew the one 6.2mm screw in the upper left-hand corner of the network card.
You will see a white rectangular piece next to the upper left-hand corner of the motherboard that is connected with a black cord and a white cord; this is the network card.
Unscrew the one 6.2mm screw in the upper left-hand corner of the network card.
Step 4
- Remove the black and the white cords from the network card.
- Slide the card out of the motherboard and replace it with the new one.
Remove the black and the white cords from the network card.
Slide the card out of the motherboard and replace it with the new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Payton Stewart
Member since: 09/25/2017
101 Reputation
1 Guide authored
Badges:
2
Team
USF Tampa, Team S3-G1, Cannon Fall 2017
Member of USF Tampa, Team S3-G1, Cannon Fall 2017
USFT-CANNON-F17S3G1
4 Members
6 Guides authored