Difficulty
Easy
Steps
9
Time Required
10 - 15 minutes
Sections
3
- Back Cover
- 2 steps
- Keyboard
- 4 steps
- Battery
- 3 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackAcer Aspire ES1-512-C80E
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Place the device upside down on a flat surface.
- Using a Phillips #00 screwdriver, remove all nineteen 1.2mm screws that secure the bottom cover of the device.
Place the device upside down on a flat surface.
Using a Phillips #00 screwdriver, remove all nineteen 1.2mm screws that secure the bottom cover of the device.
1024
Step 2
- Pry around the edges with a spudger to remove the back cover.
- The two hinges on the back require additional force to be popped open.
Pry around the edges with a spudger to remove the back cover.
The two hinges on the back require additional force to be popped open.
Step 3
Keyboard
- The keyboard is the silver piece located by itself on the upper half of the laptop.
- Using a Phillips #00 screwdriver, remove the four 1.2mm screws from the keyboard.
- Using a spudger, go around the edges and pry off the keyboard.
- All black clips will have to be removed before the keyboard can be removed.
The keyboard is the silver piece located by itself on the upper half of the laptop.
Using a Phillips #00 screwdriver, remove the four 1.2mm screws from the keyboard.
Using a spudger, go around the edges and pry off the keyboard.
All black clips will have to be removed before the keyboard can be removed.
Step 4
- Remove the ribbon cable connection from the keyboard.
- Peel back the two pieces of tape to separate the keyboard.
- Remove the keyboard from under the plastic covering.
- Remove the silver plate back cover of the keyboard from the bottom base.
Remove the ribbon cable connection from the keyboard.
Peel back the two pieces of tape to separate the keyboard.
Remove the keyboard from under the plastic covering.
Remove the silver plate back cover of the keyboard from the bottom base.
Step 5
- Remove the large silver plate from the keyboard.
- You can not remove the silver backing with the attached wire from the back of the keyboard.
Remove the large silver plate from the keyboard.
You can not remove the silver backing with the attached wire from the back of the keyboard.
Step 6
- The keyboard is removed and ready to be replaced.
The keyboard is removed and ready to be replaced.
Step 7
Battery
- Remove the two 1.2mm Phillips #00 screws securing the battery.
Remove the two 1.2mm Phillips #00 screws securing the battery.
Step 8
- Use a nylon spudger to remove the battery from the clips that hold it down.
Use a nylon spudger to remove the battery from the clips that hold it down.
Step 9
- Remove the wired connection to the laptop by pulling the plug out of the motherboard.
- Remove the battery from the laptop.
Remove the wired connection to the laptop by pulling the plug out of the motherboard.
Remove the battery from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Robert Creighton
Member since: 10/31/2019
679 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team S2-G8, Barthe Fall 2019
Member of UMass Dartmouth, Team S2-G8, Barthe Fall 2019
UMASSD-BARTHE-F19S2G8
3 Members
7 Guides authored
