Difficulty

Difficult

Steps

6

Time Required

                          15 - 25 minutes

Sections

2

  • Back Cover
  • 2 steps
  • Keyboard
  • 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackAcer Aspire ES1-512-C80E

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Place the device upside down on a flat surface.
  • Using a Phillips #00 screwdriver, remove all nineteen 1.2mm screws that secure the bottom cover of the device.

Place the device upside down on a flat surface.

Using a Phillips #00 screwdriver, remove all nineteen 1.2mm screws that secure the bottom cover of the device.

1024

Step 2

  • Pry around the edges with a spudger to remove the back cover.
  • The two hinges on the back require additional force to be popped open.

Pry around the edges with a spudger to remove the back cover.

The two hinges on the back require additional force to be popped open.

Step 3

              Keyboard
  • The keyboard is the silver piece located by itself on the upper half of the laptop.
  • Using a Phillips #00 screwdriver, remove the four 1.2mm screws from the keyboard.
  • Using a spudger, go around the edges and pry off the keyboard.
  • All black clips will have to be removed before the keyboard can be removed.

The keyboard is the silver piece located by itself on the upper half of the laptop.

Using a Phillips #00 screwdriver, remove the four 1.2mm screws from the keyboard.

Using a spudger, go around the edges and pry off the keyboard.

All black clips will have to be removed before the keyboard can be removed.

Step 4

  • Remove the ribbon cable connection from the keyboard.
  • Peel back the two pieces of tape to separate the keyboard.
  • Remove the keyboard from under the plastic covering.
  • Remove the silver plate back cover of the keyboard from the bottom base.

Remove the ribbon cable connection from the keyboard.

Peel back the two pieces of tape to separate the keyboard.

Remove the keyboard from under the plastic covering.

Remove the silver plate back cover of the keyboard from the bottom base.

Step 5

  • Remove the large silver plate from the keyboard.
  • You can not remove the silver backing with the attached wire from the back of the keyboard.

Remove the large silver plate from the keyboard.

You can not remove the silver backing with the attached wire from the back of the keyboard.

Step 6

  • The keyboard is removed and ready to be replaced.

The keyboard is removed and ready to be replaced.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Robert Creighton

Member since: 10/31/2019

679 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S2-G8, Barthe Fall 2019                        

                                                  Member of UMass Dartmouth, Team S2-G8, Barthe Fall 2019 



                    UMASSD-BARTHE-F19S2G8                     


                                            3 Members                     


                                            7 Guides authored