Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

2

  • Battery
  • 4 steps
  • RAM
  • 1 step

Flags

0

  • BackAcer Aspire ES1-711-P1UV

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Place the laptop face down on a flat, clean surface.
  • Remove all twenty-seven 7 mm screws on the back cover of the laptop with a Phillips #0 screwdriver. Screws are circled in red on the diagram.

Place the laptop face down on a flat, clean surface.

Remove all twenty-seven 7 mm screws on the back cover of the laptop with a Phillips #0 screwdriver. Screws are circled in red on the diagram.

1024

Step 2

  • Use the iFixit opening tool to pry open the four corners of the back cover of the laptop. You may need to use your hands to fully remove the cover.
  • Be sure to evenly apply pressure when removing the back cover.

Use the iFixit opening tool to pry open the four corners of the back cover of the laptop. You may need to use your hands to fully remove the cover.

Be sure to evenly apply pressure when removing the back cover.

Step 3

  • Remove the two 5 mm screws located on either side of the battery.

Remove the two 5 mm screws located on either side of the battery.

Step 4

  • Disconnect the colored bundled cable connectors from the motherboard. To do this, pull on the wires to disconnect the cable and remove the battery.

Disconnect the colored bundled cable connectors from the motherboard. To do this, pull on the wires to disconnect the cable and remove the battery.

Step 5

              RAM               
  • Locate RAM and push metal clips outwards to release RAM. The RAM will eject at a 30 degree angle.
  • Slide the RAM out of the clips to remove.

Locate RAM and push metal clips outwards to release RAM. The RAM will eject at a 30 degree angle.

Slide the RAM out of the clips to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Camille Ingham                     

Member since: 03/22/2018

418 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Sam Houston State, Team S17-G3, Blackburne Winter 2018                        

                                                  Member of Sam Houston State, Team S17-G3, Blackburne Winter 2018 



                    SHSU-BLACKBURNE-W18S17G3                     


                                            1 Member                     


                                            2 Guides authored