Difficulty
Moderate
Steps
4
Time Required
4 - 5 minutes
Sections
1
- RAM
- 4 steps
Flags
0
BackAcer Aspire One 532h-2806
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Turn off the computer and remove the battery before removing parts.
- Use a Phillips #0 screwdriver to remove the 6mm screw from the back of the computer.
Turn off the computer and remove the battery before removing parts.
Use a Phillips #0 screwdriver to remove the 6mm screw from the back of the computer.
1024
Step 2
- Use an opening tool to remove the plastic plate covering the RAM, using the notch on the bottom right side.
- Remove the plate.
Use an opening tool to remove the plastic plate covering the RAM, using the notch on the bottom right side.
Remove the plate.
Step 3
- At the same time, press the latches on the sides of the RAM card to remove it.
- The RAM should pop up.
At the same time, press the latches on the sides of the RAM card to remove it.
The RAM should pop up.
Step 4
- Remove the RAM card.
Remove the RAM card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Julie Paula
Member since: 01/12/2017
503 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Oakland University, Team 2-4, Ruskiewicz Winter 2017
Member of Oakland University, Team 2-4, Ruskiewicz Winter 2017
OAK-RUSKIEWICZ-W17S2G4
3 Members
8 Guides authored