Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

1

  • Screen
  • 8 steps

Flags

0

  • BackAcer Aspire One 532h-2806

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Turn the device off before beginning any replacements.
  • Locate the two circular black stickers at the bottom corners of the laptop screen.
  • Remove the stickers.
  • Two 6mm Phillips Screws should now be visible.

Turn the device off before beginning any replacements.

Locate the two circular black stickers at the bottom corners of the laptop screen.

Remove the stickers.

Two 6mm Phillips Screws should now be visible.

1024

Step 2

  • Use a Phillips #0 Screwdriver to remove the two 6mm screws from the screen.

Use a Phillips #0 Screwdriver to remove the two 6mm screws from the screen.

Step 3

  • Using the opener tool, remove the plastic cover, surrounding the screen.
  • It is normal to hear clicking sounds as the plastic cover is removed.

Using the opener tool, remove the plastic cover, surrounding the screen.

It is normal to hear clicking sounds as the plastic cover is removed.

Step 4

  • Remove the four 6mm Phillips screws surrounding the screen.
  • These are holding the screen in place. After the screws are removed, the screen should remove itself from the plastic outer cover.

Remove the four 6mm Phillips screws surrounding the screen.

These are holding the screen in place. After the screws are removed, the screen should remove itself from the plastic outer cover.

Step 5

  • Peel back the fuss cable from the outer laptop plastic cover.
  • Be careful, not to yank or rip the cable, it should gently peel back.

Peel back the fuss cable from the outer laptop plastic cover.

Be careful, not to yank or rip the cable, it should gently peel back.

Step 6

  • Locate the ZIF (zero insertion force) Cable.
  • Peel back any tape if necessary
  • Carefully unplug it.
  • Do not pull hard, it should remove itself easily.

Locate the ZIF (zero insertion force) Cable.

Peel back any tape if necessary

Carefully unplug it.

Do not pull hard, it should remove itself easily.

Step 7

  • Remove the two 6mm screws on each side of the screen with a Phillips #0 screwdriver.

Remove the two 6mm screws on each side of the screen with a Phillips #0 screwdriver.

Step 8

  • Remove the screen.

Remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Julie Paula

Member since: 01/12/2017

503 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Oakland University, Team 2-4, Ruskiewicz Winter 2017                        

                                                  Member of Oakland University, Team 2-4, Ruskiewicz Winter 2017 



                    OAK-RUSKIEWICZ-W17S2G4                     


                                            3 Members                     


                                            8 Guides authored