Difficulty
Moderate
Steps
10
Time Required
15 - 20 minutes
Sections
2
- Battery
- 5 steps
- Keyboard Keys and Battery
- 5 steps
Flags
0
BackAcer Aspire One 722
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before you begin:
- Please note that a battery replacement is not required in order to replace your keyboard keys.You will need to purchase new keys if the keys OR pivoting pieces beneath the key are replacing are broken.Steps 2-5 will help you replace your battery and steps 6-10 will help you replace the keys.Please remember to completely shut down your netbook before any of the following replacements.
What you need
Step 1
Battery
- Power down the netbook by pressing the power button on the top left corner.
Power down the netbook by pressing the power button on the top left corner.
1024
Step 2
- Close the netbook and flip it over so that the back is facing up.
Close the netbook and flip it over so that the back is facing up.
Step 3
- Slide the button below the battery to the right while simultaneously pulling the battery out.
Slide the button below the battery to the right while simultaneously pulling the battery out.
Step 4
- If necessary, remove the old battery and replace it with a new one.
If necessary, remove the old battery and replace it with a new one.
Step 5
- Check the thin grooves on the side of the battery entry and line the replacement battery up to the grooves.
Check the thin grooves on the side of the battery entry and line the replacement battery up to the grooves.
Step 6
Keyboard Keys and Battery
- Use the flat end of a spudger to pry off the keyboard key.
- If the key is broken, just remove the broken key and press a new key down over the empty key area. If you need to repair the key, follow the steps below.
Use the flat end of a spudger to pry off the keyboard key.
If the key is broken, just remove the broken key and press a new key down over the empty key area. If you need to repair the key, follow the steps below.
Step 7
- Use a spudger to pry the upper portion on both sides of the mechanism until it pops off from the key socket.
Use a spudger to pry the upper portion on both sides of the mechanism until it pops off from the key socket.
Step 8
- Take both pivoting pieces of the mechanism and put them together.
- The smaller piece fits through the inner part of the larger piece and lays in the groove of the larger piece.
- Once assembled, it should be entirely flat.
Take both pivoting pieces of the mechanism and put them together.
The smaller piece fits through the inner part of the larger piece and lays in the groove of the larger piece.
Once assembled, it should be entirely flat.
Step 9
- Position the pivoting smaller piece of the key mechanism in the lower hooks of the key socket.
- Slide your finger across the upper portion of the key mechanism so that it locks in place with the upper hooks of the key socket.
Position the pivoting smaller piece of the key mechanism in the lower hooks of the key socket.
Slide your finger across the upper portion of the key mechanism so that it locks in place with the upper hooks of the key socket.
Step 10
- Place the key on top of the empty key space and press it down firmly until the key locks in place.
Place the key on top of the empty key space and press it down firmly until the key locks in place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 7 other contributors
Christian Barboza
Member since: 10/25/2015
818 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015
Member of UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015
UMASSD-GULBRANDSEN-F15S5G6
3 Members
10 Guides authored
