Difficulty

Moderate

Steps

11

Time Required

                          10 - 40 minutes

Sections

2

  • Battery
  • 5 steps
  • RAM
  • 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAcer Aspire One 722

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Power down the netbook by pressing the power button on the top left corner.

Power down the netbook by pressing the power button on the top left corner.

1024

Step 2

  • Close the netbook and flip it over so that the back is facing up.

Close the netbook and flip it over so that the back is facing up.

Step 3

  • Slide the button below the battery to the right while simultaneously pulling the battery out.

Slide the button below the battery to the right while simultaneously pulling the battery out.

Step 4

  • If necessary, remove the old battery and replace it with a new one.

If necessary, remove the old battery and replace it with a new one.

Step 5

  • Check the thin grooves on the side of the battery entry and line the replacement battery up to the grooves.

Check the thin grooves on the side of the battery entry and line the replacement battery up to the grooves.

Step 6

              RAM
  • Remove the screw at the bottom of the laptop.

Remove the screw at the bottom of the laptop.

Step 7

  • Take the plastic backing plate off.

Take the plastic backing plate off.

Step 8

  • Unclip the two metal braces that hold the RAM in place by pushing the metal clips outwards away from the RAM itself.
  • The RAM should pop up.

Unclip the two metal braces that hold the RAM in place by pushing the metal clips outwards away from the RAM itself.

The RAM should pop up.

Step 9

  • Grab the RAM and remove slowly.

Grab the RAM and remove slowly.

Step 10

  • Take the replacement RAM stick and line up the the grooves on the RAM to the grooves on the netbook so that they will fit in flush.

Take the replacement RAM stick and line up the the grooves on the RAM to the grooves on the netbook so that they will fit in flush.

Step 11

  • Press down on the RAM stick and the metal clips will lock in to place.

Press down on the RAM stick and the metal clips will lock in to place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors 


                    Christian Barboza

Member since: 10/25/2015

818 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015                        

                                                  Member of UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 



                    UMASSD-GULBRANDSEN-F15S5G6                     


                                            3 Members                     


                                            10 Guides authored