Acer Aspire One 725 0845 Hard Drive Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          3 minutes            

Sections

3

• Battery
• 2 steps
• Back Plate
• 1 step
• Hard Drive
• 2 steps

Flags

0

• BackAcer Aspire One 725-0845

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Ensure the device is powered off by holding down the power button on the top left-hand side.
• On a flat, level surface, flip the device over so that the back-plate is accessible.

Ensure the device is powered off by holding down the power button on the top left-hand side.

On a flat, level surface, flip the device over so that the back-plate is accessible.

1024

Step 2

• Using a spudger or any fine-pointed tool, push the release slide away from the center of the device.
• Simultaneously pull the battery out and away from the device.

Using a spudger or any fine-pointed tool, push the release slide away from the center of the device.

Simultaneously pull the battery out and away from the device.

Step 3

              Back Plate               

• Using the JIS J1 Screwdriver Bit and Driver, remove the center screw (7.0 mm) from the back-plate.
• Using your hands, slide the back-plate away from the center of the device and remove.

Using the JIS J1 Screwdriver Bit and Driver, remove the center screw (7.0 mm) from the back-plate.

Using your hands, slide the back-plate away from the center of the device and remove.

Step 4

              Hard Drive               

• Using the JIS J1 Screwdriver Bit and Driver, remove the two screws (9.0 mm) from the outward side of the hard drive.

Using the JIS J1 Screwdriver Bit and Driver, remove the two screws (9.0 mm) from the outward side of the hard drive.

Step 5

• Using your hand, slide the hard drive away from the center of the device until it disconnects from the motherboard.
• Carefully lift the outward side of the hard drive and place the drive on a clean, non-magnetic surface.

Using your hand, slide the hard drive away from the center of the device until it disconnects from the motherboard.

Carefully lift the outward side of the hard drive and place the drive on a clean, non-magnetic surface.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Jose Souto                     

Member since: 02/15/2017

337 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team 8-3, Eyestone Spring 2017                        

                                                  Member of USF Tampa, Team 8-3, Eyestone Spring 2017 



                    USFT-EYESTONE-S17S8G3                     


                                            4 Members                     


                                            16 Guides authored