Acer Aspire One 725 0845 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          10 minutes            

Sections

5

• Battery
• 2 steps
• Back Plate
• 1 step
• Hard Drive
• 2 steps
• Inner Frame
• 3 steps
• Speaker
• 3 steps

Flags

0

• BackAcer Aspire One 725-0845

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Ensure the device is powered off by holding down the power button on the top left-hand side.
• On a flat, level surface, flip the device over so that the back-plate is accessible.

Ensure the device is powered off by holding down the power button on the top left-hand side.

On a flat, level surface, flip the device over so that the back-plate is accessible.

1024

Step 2

• Using a spudger or any fine-pointed tool, push the release slide away from the center of the device.
• Simultaneously pull the battery out and away from the device.

Using a spudger or any fine-pointed tool, push the release slide away from the center of the device.

Simultaneously pull the battery out and away from the device.

Step 3

              Back Plate               

• Using the JIS J1 Screwdriver Bit and Driver, remove the center screw (7.0 mm) from the back-plate.
• Using your hands, slide the back-plate away from the center of the device and remove.

Using the JIS J1 Screwdriver Bit and Driver, remove the center screw (7.0 mm) from the back-plate.

Using your hands, slide the back-plate away from the center of the device and remove.

Step 4

              Hard Drive               

• Using the JIS J1 Screwdriver Bit and Driver, remove the two screws (9.0 mm) from the outward side of the hard drive.

Using the JIS J1 Screwdriver Bit and Driver, remove the two screws (9.0 mm) from the outward side of the hard drive.

Step 5

• Using your hand, slide the hard drive away from the center of the device until it disconnects from the motherboard.
• Carefully lift the outward side of the hard drive and place the drive on a clean, non-magnetic surface.

Using your hand, slide the hard drive away from the center of the device until it disconnects from the motherboard.

Carefully lift the outward side of the hard drive and place the drive on a clean, non-magnetic surface.

Step 6

              Inner Frame               

• Using the JIS J1 Screwdriver Bit and Driver, remove the six outside screws (7.0 mm).
• Using the JIS J1 Screwdriver Bit and Driver, remove the seven inside screws (8.0 mm).
• Using the JIS J1 Screwdriver Bit and Driver, remove the one inside screw (3.0 mm).

Using the JIS J1 Screwdriver Bit and Driver, remove the six outside screws (7.0 mm).

Using the JIS J1 Screwdriver Bit and Driver, remove the seven inside screws (8.0 mm).

Using the JIS J1 Screwdriver Bit and Driver, remove the one inside screw (3.0 mm).

Step 7

• Using your hands, slide the brown release tabs for the keyboard connection away from the center of the device.
• Gently remove the keyboard connection by pulling away from the center of the device.
• Lift the black locks for the touchpad connections into the upward position.
• Gently remove the touchpad connections by pulling the purple tabs away from the locks.

Using your hands, slide the brown release tabs for the keyboard connection away from the center of the device.

Gently remove the keyboard connection by pulling away from the center of the device.

Lift the black locks for the touchpad connections into the upward position.

Gently remove the touchpad connections by pulling the purple tabs away from the locks.

Step 8

• Flip the device over and open it.
• Using the plastic opening tools, remove the cover/palm rest from the frame of the device.

Flip the device over and open it.

Using the plastic opening tools, remove the cover/palm rest from the frame of the device.

Step 9

              Speaker               

• Lift the black locks for the indicator light connections into the upward position.
• Remove the indicator light connection by gently pulling the purple tabs away from the locks.

Lift the black locks for the indicator light connections into the upward position.

Remove the indicator light connection by gently pulling the purple tabs away from the locks.

Step 10

• Disconnect the speakers from the motherboard by carefully pulling the adapter away from the center of the device.

Disconnect the speakers from the motherboard by carefully pulling the adapter away from the center of the device.

Step 11

• Very carefully remove the speaker wire from the wiring harness.
• Remove the speakers by lifting them up and away from the device.

Very carefully remove the speaker wire from the wiring harness.

Remove the speakers by lifting them up and away from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    James Catalfu                     

Member since: 02/15/2017

281 Reputation

                                      1 Guide authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 8-3, Eyestone Spring 2017                        

                                                  Member of USF Tampa, Team 8-3, Eyestone Spring 2017 



                    USFT-EYESTONE-S17S8G3                     


                                            4 Members                     


                                            16 Guides authored