Difficulty
Easy
Steps
5
Time Required
6 minutes
Sections
2
- Battery
- 2 steps
- Network Card
- 3 steps
Flags
0
BackAcer Aspire One 751h-1948
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Close the laptop and flip it over to view the back of the laptop.
Close the laptop and flip it over to view the back of the laptop.
1024
Step 2
- Unlock the right side of the battery by sliding the battery lock to the right. Then slide the left lock to the left and remove the battery.
Unlock the right side of the battery by sliding the battery lock to the right. Then slide the left lock to the left and remove the battery.
Step 3
Network Card
- Unscrew the two Phillips #0 (M2-L2.5 mm) holding down the network card panel.
- These screws don’t come all the way out.
Unscrew the two Phillips #0 (M2-L2.5 mm) holding down the network card panel.
These screws don’t come all the way out.
Step 4
- Unplug the two connecting cables by lifting them up. They should unclip easily.
Unplug the two connecting cables by lifting them up. They should unclip easily.
Step 5
- Remove the screw Phillips #0 (M2-L3 mm) holding down the network card. Pull out the card.
Remove the screw Phillips #0 (M2-L3 mm) holding down the network card. Pull out the card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Francisco Monteiro Junior
Member since: 03/05/2017
548 Reputation
4 Guides authored
Badges:
14
+11 more badges
Team
UMass Dartmouth, Team S8-G2, Catania Spring 2017
Member of UMass Dartmouth, Team S8-G2, Catania Spring 2017
UMASSD-CATANIA-S17S8G2
3 Members
8 Guides authored