Acer Aspire One Ao756 2623 Touchpad Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Battery
3 steps
Back Cover
2 steps
Keyboard
4 steps
Touchpad
1 step

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackAcer Aspire One AO756-2623
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Orient the ACER Aspire One to where the bottom of the laptop is facing upward as shown in the picture.

Orient the ACER Aspire One to where the bottom of the laptop is facing upward as shown in the picture.

1024

Step 2

Locate the circular slot positioned at the bottom right of the battery.

Locate the circular slot positioned at the bottom right of the battery.

Step 3

Insert a spudger and slide the tab to the right.
When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
Hold the tab in the right-hand position and firmly push or pull the battery upward to remove it from the laptop.

Insert a spudger and slide the tab to the right.

When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

Hold the tab in the right-hand position and firmly push or pull the battery upward to remove it from the laptop.

Step 4

              Back Cover

Locate the single 6 mm Phillips screw in the lower middle of the back plate.
Remove the screw using a Phillips #0 Screwdriver.

Locate the single 6 mm Phillips screw in the lower middle of the back plate.

Remove the screw using a Phillips #0 Screwdriver.

Step 5

Slide the back plate downward to remove it from the laptop.

Slide the back plate downward to remove it from the laptop.

Step 6

              Keyboard

Locate the eighteen 6 mm Phillips screws that are required to remove the keyboard.
Remove all screws using a Phillips #0 screwdriver.

Locate the eighteen 6 mm Phillips screws that are required to remove the keyboard.

Remove all screws using a Phillips #0 screwdriver.

Step 7

Orient the laptop to where the open screen is facing towards you.
Slide the spuldger into the indicated crease.
Firmly slide spudger all the way around the laptop to pry the keyboard away from the bottom of the laptop.
Loud cracking noises will be heard during this step.

Orient the laptop to where the open screen is facing towards you.

Slide the spuldger into the indicated crease.

Firmly slide spudger all the way around the laptop to pry the keyboard away from the bottom of the laptop.

Loud cracking noises will be heard during this step.

Step 8

Remove the green dotted ribbon cable by sliding it straight out of the clamp holding it in using a plastic spudger.
Locate the two tabs that are holding the larger black ribbon cable in place.
Remove the larger black ribbon cable by pressing in the tabs and sliding it straight out of the clamp holding it in using a plastic spudger.
To remove the keyboard, lift the keyboard straight away from the rest of the laptop.

Remove the green dotted ribbon cable by sliding it straight out of the clamp holding it in using a plastic spudger.

Locate the two tabs that are holding the larger black ribbon cable in place.

Remove the larger black ribbon cable by pressing in the tabs and sliding it straight out of the clamp holding it in using a plastic spudger.

To remove the keyboard, lift the keyboard straight away from the rest of the laptop.

Step 9

Locate the ten 6 mm Phillips screws that connect the keyboard to the rest of the laptop and remove them with a Phillips #0 Screwdriver.
Locate the four 6 mm Phillips screws hidden beneath black tape by lifting up the black tape and remove them with a Phillips #0 Screwdriver.
To remove keyboard from the rest of the laptop, pull keyboard straight up.

Locate the ten 6 mm Phillips screws that connect the keyboard to the rest of the laptop and remove them with a Phillips #0 Screwdriver.

Locate the four 6 mm Phillips screws hidden beneath black tape by lifting up the black tape and remove them with a Phillips #0 Screwdriver.

To remove keyboard from the rest of the laptop, pull keyboard straight up.

Step 10

              Touchpad

Take the keyboard frame and place it face down as shown.
To remove the touchpad from the rest of the laptop, pull it straight out.

Take the keyboard frame and place it face down as shown.

To remove the touchpad from the rest of the laptop, pull it straight out.

To put the laptop together, follow these instructions in the reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Kailey Gorski

Member since: 03/21/2016

242 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Clemson, Team 7-1, Benson Spring 2016                        

                                                  Member of Clemson, Team 7-1, Benson Spring 2016 



                    CLEM-BENSON-S16S7G1                     


                                            4 Members                     


                                            14 Guides authored

Incorrect Tools#

Introduction#

What you need#

Team#

Incorrect Tools

Introduction

What you need

Team