Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

2

  • Battery
  • 2 steps
  • Wireless Card
  • 3 steps

Flags

0

  • BackAcer Aspire One D255-1625

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The wireless card  allows a computer to connect to the internet by using frequencies transmitted by a router or a cellular tower. A damaged or defective wireless card will not allow your device to connect to the internet.

Before replacing the wireless card make sure to see our guide “Acer Aspire One D255-1625 Wireless Card Troubleshooting”.

What you need

Step 1

              Battery
  • Before you replace the battery, ensure that the device is unplugged and powered off.
  • Pull the upper left switch on the back of the laptop to the left into the unlock position.
  • Pull the upper right switch to the left and hold it in place.

Before you replace the battery, ensure that the device is unplugged and powered off.

Pull the upper left switch on the back of the laptop to the left into the unlock position.

Pull the upper right switch to the left and hold it in place.

1024

Step 2

  • Pull the battery straight out.
  • To properly dispose of battery, locate your nearest recycling plant to dispose of it there.

Pull the battery straight out.

To properly dispose of battery, locate your nearest recycling plant to dispose of it there.

Step 3

              Wireless Card
  • Use iFixit’s Jimmy tool to remove the bottom panel of the device.
  • Wedge the tool into the top middle of the panel and slide back and forth across the edge until the back gently pops off.

Use iFixit’s Jimmy tool to remove the bottom panel of the device.

Wedge the tool into the top middle of the panel and slide back and forth across the edge until the back gently pops off.

Step 4

  • Use tweezers to disconnect the black and white wires from the wireless card by pulling them up off the card.

Use tweezers to disconnect the black and white wires from the wireless card by pulling them up off the card.

Step 5

  • Use a Phillips #1 screwdriver to unscrew the top right screw on the wireless card.
  • Pull out wireless card by sliding it out to your right.

Use a Phillips #1 screwdriver to unscrew the top right screw on the wireless card.

Pull out wireless card by sliding it out to your right.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Alexander Ilibasic

Member since: 01/30/2020

430 Reputation

                                      3 Guides authored                  



                       Badges:
                       6





                                                        +3 more badges

Team

                       Embry-Riddle Aeronautical University, Team S14-G4, Lamothe Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S14-G4, Lamothe Spring 2020 



                    ERAU-LAMOTHE-S20S14G4                     


                                            4 Members                     


                                            5 Guides authored

sohil shekh - Aug 31, 2022

Reply

Awesome I changed wireless card with your instruction this is a helpful 👍👍