Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- 3G Card
- 5 steps
Flags
0
BackAcer Aspire One D250-1151
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
3G Card
- Place the computer face down on a flat surface.
Place the computer face down on a flat surface.
1024
Step 2
- Unscrew the smallest panel using a Philips PH1 screwdriver in a counterclockwise motion.
Unscrew the smallest panel using a Philips PH1 screwdriver in a counterclockwise motion.
Step 3
- Open the panel by lifting up in the small groove using a finger, Plastic Opening Tool or similar device.
Open the panel by lifting up in the small groove using a finger, Plastic Opening Tool or similar device.
Step 4
- Slide the 3G card forward until it is not connected.
Slide the 3G card forward until it is not connected.
Step 5
- Remove the 3G Card from the compartment.
Remove the 3G Card from the compartment.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Donny McKay
Member since: 11/03/2016
494 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Baylor, Team 5-11, Williams Fall 2016
Member of Baylor, Team 5-11, Williams Fall 2016
BU-WILLIAMS-F16S5G11
3 Members
14 Guides authored
