Difficulty
Easy
Steps
7
Time Required
5 minutes
Sections
1
- RAM
- 7 steps
Flags
0
BackAcer Aspire One D250-1151
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Keep in mind that the RAM is an important component, please be careful with it as you remove it.
Keep all components away from magnets as this can damage them.
What you need
Step 1
RAM
- Place the computer face down on a flat surface.
Place the computer face down on a flat surface.
1024
Step 2
- Unscrew the center panel using a Philips PH1 screwdriver in a counterclockwise motion.
Unscrew the center panel using a Philips PH1 screwdriver in a counterclockwise motion.
Step 3
- Open the panel by lifting up in the small groove using a Plastic Opening Tool or similar device.
Open the panel by lifting up in the small groove using a Plastic Opening Tool or similar device.
Step 4
- Remove the panel.
Remove the panel.
Step 5
- Slide the RAM away from the slot.
Slide the RAM away from the slot.
Step 6
- Pull one of the tabs away from the RAM.
- Place a plastic opening tool under the RAM and lift up while holding the tab.
Pull one of the tabs away from the RAM.
Place a plastic opening tool under the RAM and lift up while holding the tab.
Step 7
- Place your finger under the RAM and lift up to release.
Place your finger under the RAM and lift up to release.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Evan Edmunds
Member since: 10/31/2016
237 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
Baylor, Team 5-11, Williams Fall 2016
Member of Baylor, Team 5-11, Williams Fall 2016
BU-WILLIAMS-F16S5G11
3 Members
14 Guides authored
