Difficulty
Moderate
Steps
7
Time Required
5 minutes
Sections
3
- Battery
- 3 steps
- Keyboard
- 2 steps
- Acer Aspire One D257 opening the hatch
- 2 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAcer Aspire One D257
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Put the netbook, so the back side is upwards.
Put the netbook, so the back side is upwards.
1024
Step 2
- Push the right lock to the right so the red filed is visible on the left.
Push the right lock to the right so the red filed is visible on the left.
Step 3
- Now move the left lock which is spring loaded to the leftand keep it there. Then with the other hand remove the battery by pulling down.
- When reassembeling the new battery push it up into the netbook and do lock the right by moving it to the left so the red field disappears.
Now move the left lock which is spring loaded to the leftand keep it there. Then with the other hand remove the battery by pulling down.
When reassembeling the new battery push it up into the netbook and do lock the right by moving it to the left so the red field disappears.
Step 4
Keyboard
- Open the lid othe the netbook. Use the Jimmy from the upper left corner of the keyboard. Put it between the keyboard and th casing and move it to the right. It might help to use a metal spudger to push in the pins holding the keyboard in place.
- Then move down along the sides where there is one pin on each side. After that twist the keyboard towards you.
Open the lid othe the netbook. Use the Jimmy from the upper left corner of the keyboard. Put it between the keyboard and th casing and move it to the right. It might help to use a metal spudger to push in the pins holding the keyboard in place.
Then move down along the sides where there is one pin on each side. After that twist the keyboard towards you.
Step 5
- Now open the brown connector so the flat cable is loose. Then you can remove the keyboard.
Now open the brown connector so the flat cable is loose. Then you can remove the keyboard.
Step 6
Acer Aspire One D257 opening the hatch
- Remove the 5 screws marked with “Door”.
Remove the 5 screws marked with “Door”.
Step 7
- Use a spudger or flat screwdriver to push down the hatch where it is marked “Door release”.
- Now you can carfully remove the hatch.
- When reassembling the hatch look that the noses are aimed at the appropriate holes in the case, then you can press down the rest of the hatch onto the netbook.
Use a spudger or flat screwdriver to push down the hatch where it is marked “Door release”.
Now you can carfully remove the hatch.
When reassembling the hatch look that the noses are aimed at the appropriate holes in the case, then you can press down the rest of the hatch onto the netbook.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Claes
Sam Goldheart
Author
with 1 other contributor
Claes
Member since: 02/01/2016
3,376 Reputation
6 Guides authored
Badges:
36
+33 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
