Featured
Featured Guide
Difficulty
Easy
Steps
8
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- Wireless Card
- 5 steps
Flags
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackAcer Aspire One ZG5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the netbook upside down with the battery at the top, facing away from you.
Turn the netbook upside down with the battery at the top, facing away from you.
1024
Step 2
- Unlock the battery by sliding the switch located near the left hinge to the left “unlocked” position.
Unlock the battery by sliding the switch located near the left hinge to the left “unlocked” position.
Step 3
- Slide the latch located on the opposite hinge from the lock while pushing the battery up.
Slide the latch located on the opposite hinge from the lock while pushing the battery up.
Step 4
Wireless Card
- Gently loosen the two Phillips #0 screws in the small panel that covers the wireless card.
- These screws are built into the panel and aren’t meant to be completely removed.
Gently loosen the two Phillips #0 screws in the small panel that covers the wireless card.
These screws are built into the panel and aren’t meant to be completely removed.
Step 5
- Lift up the panel and remove it from the case.
Lift up the panel and remove it from the case.
Step 6
- Disconnect the two antenna cables from the left side of the wireless card.
Disconnect the two antenna cables from the left side of the wireless card.
Step 7
- Remove the single 3.9 mm Phillips #1 screw from the bottom left of the wireless card.
Remove the single 3.9 mm Phillips #1 screw from the bottom left of the wireless card.
Step 8
- Gently lift up the left side of the wireless card and slide the card out of its socket.
Gently lift up the left side of the wireless card and slide the card out of its socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 6 other contributors
Doug Gallatin
Member since: 10/05/2010
6,310 Reputation
10 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 7-49, Amido Fall 2010
Member of Cal Poly, Team 7-49, Amido Fall 2010
CPSU-AMIDO-F10S7G49
5 Members
20 Guides authored