Difficulty
Very easy
Steps
7
Time Required
10 minutes
Sections
2
- Battery
- 5 steps
- RAM
- 2 steps
Flags
0
BackAcer Aspire R11 R3-131T-C1Z5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop on to its front, so that the back is facing up
- Unscrew the twelve 19.05 mm PH#0 screws.
Flip the laptop on to its front, so that the back is facing up
Unscrew the twelve 19.05 mm PH#0 screws.
1024
Step 2
- At the left front corner of the laptop, under the intel sticker, press the sharp end of a metal spudger between the keyboard and the back cover to pry it apart.
At the left front corner of the laptop, under the intel sticker, press the sharp end of a metal spudger between the keyboard and the back cover to pry it apart.
Step 3
- Connect the clip of an anti-static wrist strap to any piece of metal on the computer.
- It is important to ground yourself to avoid static.
Connect the clip of an anti-static wrist strap to any piece of metal on the computer.
It is important to ground yourself to avoid static.
Step 4
- Locate the large black rectangle at the bottom . This is your battery.
- If you see that your battery is oozing or bulging, step away from the device.
- Remove the black electric tape that is on the rainbow colored cable at the top of the battery.
- Gently pull on the cable to disconnect.
Locate the large black rectangle at the bottom . This is your battery.
If you see that your battery is oozing or bulging, step away from the device.
Remove the black electric tape that is on the rainbow colored cable at the top of the battery.
Gently pull on the cable to disconnect.
Step 5
- Remove the two 12.7 mm PH#0 screws. One of these screws is located on the top of the left side of the battery and the other is located in the top of the right side of the battery.
- Remove the battery
Remove the two 12.7 mm PH#0 screws. One of these screws is located on the top of the left side of the battery and the other is located in the top of the right side of the battery.
Remove the battery
Step 6
RAM
- Locate the large silver rectangle to the right of the hard drive. This is where your ram is located.
Locate the large silver rectangle to the right of the hard drive. This is where your ram is located.
Step 7
- Pull off the silver lid. Beneath, you will find a green circuit board. This is the RAM
- Gently push the clips away from either side of the RAM card.
- Remove the RAM
Pull off the silver lid. Beneath, you will find a green circuit board. This is the RAM
Gently push the clips away from either side of the RAM card.
Remove the RAM
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Davyd Goff
Member since: 09/27/2017
464 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
Eastern Washington University, Team S1-G2, Carnegie Fall 2017
Member of Eastern Washington University, Team S1-G2, Carnegie Fall 2017
EWU-CARNEGIE-F17S1G2
4 Members
5 Guides authored
mondanoken3 - Sep 21, 2018
Reply
can u remove ram without removing battery ?
Joel Lambert - Nov 22, 2021
no, you can’t if you don’t remove the battery you will probably get shocked if you don’t remove the battery I highly recommend removing the battery
P.U. Foundation - Dec 21, 2019
Reply
Thanks to this site; always a life saver
Joel Lambert - Nov 22, 2021
Reply
I replace my 2GB of RAM to 4GB of RAM it’s much faster but the computer does not have an HD or SSD and my is a different model
