Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

2

  • Battery
  • 1 step
  • Display Assembly
  • 6 steps

Flags

0

  • BackAcer Aspire R5-571T-57Z0

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If your screen has discolorations, lines appearing across the screen, or the touch controls are not registering, your display may be damaged and require replacement. Before continuing with this guide and replacing your display, make sure the issue is not software related. Ensure that all software has been closed and the laptop has been restarted. Additionally, update any out of date graphics drivers. Malfunctioning screens are especially common after an update to the operating system. This problem can be fixed by updating the previously mentioned graphics drivers. Consult our troubleshooting guide for more information.

This guide will show you how to replace the display assembly in your Acer Aspire R5-571T-57Z0. Before starting this guide, make sure to power off your computer and disconnect it from any external devices. Once these steps are taken, carefully follow our guide to remove the display assembly from your laptop.

What you need

Step 1

              Battery
  • Remove the three 4.0 mm screws from the battery using a Phillips #00 screwdriver.
  • Unplug the cable connected to the RAM.
  • Carefully remove the battery.

Remove the three 4.0 mm screws from the battery using a Phillips #00 screwdriver.

Unplug the cable connected to the RAM.

Carefully remove the battery.

1024

Step 2

              Display Assembly
  • Remove the six 4.0 mm screws from the hinges using a Phillips #00 screwdriver.

Remove the six 4.0 mm screws from the hinges using a Phillips #00 screwdriver.

Step 3

  • Peel back the stickers from the display cable.

Peel back the stickers from the display cable.

Step 4

  • Hold back the film protecting the Wi-Fi card.
  • Disconnect the touch screen cable.

Hold back the film protecting the Wi-Fi card.

Disconnect the touch screen cable.

Step 5

  • Pull back the tape covering the connectors.
  • Detach the two connectors (one black wire, one white wire).

Pull back the tape covering the connectors.

Detach the two connectors (one black wire, one white wire).

Step 6

  • Disconnect the touch control cable next to the black film.

Disconnect the touch control cable next to the black film.

Step 7

  • Flip over the laptop and pull back to remove the display assembly.

Flip over the laptop and pull back to remove the display assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kevin Chen

Member since: 03/23/2022

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team 1-2, Botvin Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-2, Botvin Spring 2022 



                    UMASSD-BOTVIN-S22S1G2                     


                                            3 Members                     


                                            5 Guides authored