Difficulty

Moderate

Steps

5

Time Required

                          7 minutes

Sections

3

  • Back Cover Panel
  • 1 step
  • Battery
  • 1 step
  • Display
  • 3 steps

Flags

0

  • BackAcer Aspire R5-571T-59DC

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

It may be necessary to replace this component if the screen is physically damaged or incorrectly displaying images.

Please take care to be gentle when releasing the snaps in the cover lining the display - gentle prying with a credit card or spudger should be sufficient to loosen the cover.

What you need

Step 1

              Back Cover Panel
  • Disconnect all power from the laptop and turn over so the bottom is facing you.
  • Remove the twelve 07.mm Phillips #0 screws from the back cover.
  • Work a plastic opening tool underneath and around the perimeter of the bottom cover.
  • Once unclipped, remove the bottom cover.

Disconnect all power from the laptop and turn over so the bottom is facing you.

Remove the twelve 07.mm Phillips #0 screws from the back cover.

Work a plastic opening tool underneath and around the perimeter of the bottom cover.

Once unclipped, remove the bottom cover.

1024

Step 2

              Battery
  • Remove the two 0.7mm Phillips #00 screws from the battery and unplug the battery from the motherboard.
  • Lift the battery out of the case.

Remove the two 0.7mm Phillips #00 screws from the battery and unplug the battery from the motherboard.

Lift the battery out of the case.

Step 3

              Display
  • Using a plastic opening tool, pry the back cover away from the screen.

Using a plastic opening tool, pry the back cover away from the screen.

Step 4

  • Remove the tape covering the connector cables once the screen is separated from the display board.

Remove the tape covering the connector cables once the screen is separated from the display board.

Step 5

  • Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.
  • Pull the ribbon cables out of the sockets.

Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.

Pull the ribbon cables out of the sockets.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Star Matthew

Member since: 01/25/2018

155 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S20-G2, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S20-G2, Passmore Spring 2018 



                    USFT-PASSMORE-S18S20G2                     


                                            3 Members                     


                                            7 Guides authored

Christina - Mar 15, 2019

Reply

I wish I found this tutorial before my fiance’ attempted to do this on his own. Now the replacement screen, albeit is not cracked, but the touch screen is pretty nonfunctional in my opinion. The corners don’t really work , sometimes it picks up my touch, sometimes it goes bonkers. The bottom corner of are bent and I’m continuously having to snap them back together. I’ve bought my laptop one year ago and I feel I already need to look into another. Any suggestions to try?? any help would be super appreciated.