Difficulty
Very easy
Steps
5
Time Required
10 minutes
Sections
1
- Hard Drive
- 5 steps
Flags
0
BackAcer Aspire R7-371T-72CF
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Turn off your laptop and disconnect the power adapter.
- Locate and remove all 12 Phillips #00 6mm screws on the backside of the laptop.
Turn off your laptop and disconnect the power adapter.
Locate and remove all 12 Phillips #00 6mm screws on the backside of the laptop.
1024
Step 2
- Using your prying tool, carefully remove the back panel.
Using your prying tool, carefully remove the back panel.
Step 3
- Locate the hard drive, as shown to the left. This can be identified by its location underneath the cooling fan and above the ribbon cable (the long horizontal white strip).
Locate the hard drive, as shown to the left. This can be identified by its location underneath the cooling fan and above the ribbon cable (the long horizontal white strip).
Step 4
- Remove the Phillips #00 4mm securing screw using your screwdriver.
Remove the Phillips #00 4mm securing screw using your screwdriver.
Step 5
- Remove the hard drive by pulling towards the side that was secured by the screw.
Remove the hard drive by pulling towards the side that was secured by the screw.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Dylan Meintser
Member since: 09/27/2017
476 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team S8-G5, Banghart Fall 2017
Member of Cal Poly, Team S8-G5, Banghart Fall 2017
CPSU-BANGHART-F17S8G5
5 Members
5 Guides authored
