Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
1
- USB Chip
- 5 steps
Flags
0
BackAcer Aspire R7-371T-72CF
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
USB Chip
- Turn off your laptop and disconnect the power adapter.
- Locate and remove all 12 Phillips #00 6mm screws on the backside of the laptop.
Turn off your laptop and disconnect the power adapter.
Locate and remove all 12 Phillips #00 6mm screws on the backside of the laptop.
1024
Step 2
- Using your prying tool, carefully remove the back panel.
Using your prying tool, carefully remove the back panel.
Step 3
- Locate the USB chip, as shown to the left.
- This can be identified by its location to the left of the cooling fan and above the battery to the left.
Locate the USB chip, as shown to the left.
This can be identified by its location to the left of the cooling fan and above the battery to the left.
Step 4
- Unscrew the two Phillips #00 4mm screws located on the USB chip.
Unscrew the two Phillips #00 4mm screws located on the USB chip.
Step 5
- Push the white panel upwards to unlock the cable and then remove the cable.
- Repeat for the second cable.
Push the white panel upwards to unlock the cable and then remove the cable.
Repeat for the second cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Dylan Meintser
Member since: 09/27/2017
476 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team S8-G5, Banghart Fall 2017
Member of Cal Poly, Team S8-G5, Banghart Fall 2017
CPSU-BANGHART-F17S8G5
5 Members
5 Guides authored
