Difficulty

Easy

Steps

5

Time Required

                          10 minutes

Sections

2

  • Bottom Cover
  • 3 steps
  • AC Socket
  • 2 steps

Flags

0

  • BackAcer Aspire R7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Cover
  • Shut down the laptop and disconnect the power cord.
  • Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.
  • Turn the laptop over.

Shut down the laptop and disconnect the power cord.

Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.

Turn the laptop over.

1024

Step 2

  • Remove seven 10 mm T7 screws.
  • Remove four 6 mm T7 screws.
  • Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.
  • Remove the remaining four 10 mm T7 screws.

Remove seven 10 mm T7 screws.

Remove four 6 mm T7 screws.

Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.

Remove the remaining four 10 mm T7 screws.

Step 3

  • Carefully lift the cover upwards.
  • If the cover seems stuck, use a spudger tool to pry the sides.

Carefully lift the cover upwards.

If the cover seems stuck, use a spudger tool to pry the sides.

Step 4

              AC Socket
  • Locate the AC Socket ribbon connector
  • Loosen the ribbon connector using the plastic opening tool
  • Pull the ribbon connector away from the motherboard

Locate the AC Socket ribbon connector

Loosen the ribbon connector using the plastic opening tool

Pull the ribbon connector away from the motherboard

Step 5

  • Use the plastic opening tool to pry up on the yellow tabs holding the Socket in place
  • There is two sided tape holding this component to the case
  • Once the tape on the Socket is loose, pull up and away from the case to remove it.

Use the plastic opening tool to pry up on the yellow tabs holding the Socket in place

There is two sided tape holding this component to the case

Once the tape on the Socket is loose, pull up and away from the case to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Andrew Rodiek

Member since: 01/13/2015

601 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 3-4, Hickman Winter 2015                        

                                                  Member of USF Tampa, Team 3-4, Hickman Winter 2015 



                    USFT-HICKMAN-W15S3G4                     


                                            4 Members                     


                                            7 Guides authored