Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
2
- Bottom Cover
- 3 steps
- Battery
- 2 steps
Flags
0
BackAcer Aspire R7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The Aspire laptop battery enables the computer to work without having a power cord. It is a hardware component that is not externally accessible and requires a small amount of disassembly to replace.
The 4-cell replacement battery instructions are listed below in quick simple steps. Before using this guide make sure that the battery can no longer function in one of two ways, use a multimeter to test battery strength or check the settings on the laptop if possible.
If the battery is swollen be careful and proceed with caution and take appropriate precautions.
What you need
Step 1
Cover
- Shut down the laptop and disconnect the power cord.
- Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.
- Turn the laptop over.
Shut down the laptop and disconnect the power cord.
Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.
Turn the laptop over.
1024
Step 2
- Remove seven 10 mm T7 screws.
- Remove four 6 mm T7 screws.
- Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.
- Remove the remaining four 10 mm T7 screws.
Remove seven 10 mm T7 screws.
Remove four 6 mm T7 screws.
Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.
Remove the remaining four 10 mm T7 screws.
Step 3
- Carefully lift the cover upwards.
- If the cover seems stuck, use a spudger tool to pry the sides.
Carefully lift the cover upwards.
If the cover seems stuck, use a spudger tool to pry the sides.
Step 4
Battery
- Locate the battery ribbon connector
- Remove the ribbon cable attaching the battery to the motherboard by carefully pulling it outwards
- When using the spudger be careful around the motherboard as it can easily be damaged
Locate the battery ribbon connector
Remove the ribbon cable attaching the battery to the motherboard by carefully pulling it outwards
When using the spudger be careful around the motherboard as it can easily be damaged
Step 5
- Remove the three 4.5mm #00 Phillips screws attaching the battery to the motherboard
- Push the 4 retaining clips away from the battery
- Carefully lift the battery from the motherboard
Remove the three 4.5mm #00 Phillips screws attaching the battery to the motherboard
Push the 4 retaining clips away from the battery
Carefully lift the battery from the motherboard
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 7 other contributors
F Fernandez
Member since: 01/13/2015
435 Reputation
2 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 3-4, Hickman Winter 2015
Member of USF Tampa, Team 3-4, Hickman Winter 2015
USFT-HICKMAN-W15S3G4
4 Members
7 Guides authored
amaryheart7777777 - Jun 12, 2016
Reply
great instructions
skalpinou - Jan 17, 2017
Reply
What is the battery reference for replacement ?
Eddie - Mar 13, 2018
Reply
which battery model do I purchase for replacing on an Acer Aspire R?
Alex santos - Sep 13, 2019
Reply
hey how do you want då sel it for
Anthymoine - Jun 30, 2020
Reply
super tuto
Thanks
Bests regards