Difficulty

Moderate

Steps

10

Time Required

                          15 - 20 minutes

Sections

2

  • Back Cover
  • 3 steps
  • Keyboard
  • 7 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAcer Aspire S3-391-6046

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover
  • Place laptop upside down.

Place laptop upside down.

1024

Step 2

  • Remove the twelve 5mm screws with a Phillips #1 screwdriver.

Remove the twelve 5mm screws with a Phillips #1 screwdriver.

Step 3

  • Lift cover upwards away from you.

Lift cover upwards away from you.

Step 4

              Keyboard
  • Remove the four Phillips #0 screws that are connected to the left and right speakers.
  • Carefully disconnect the wires that connect the speaker to the rest of the computer.

Remove the four Phillips #0 screws that are connected to the left and right speakers.

Carefully disconnect the wires that connect the speaker to the rest of the computer.

Step 5

  • Remove two Phillips #0 screws that are beside the ends of the gray wire.

Remove two Phillips #0 screws that are beside the ends of the gray wire.

Step 6

  • Remove the gray wire slowly with tweezers.
  • Carefully peel wire off.

Remove the gray wire slowly with tweezers.

Carefully peel wire off.

Step 7

  • Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion.

Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion.

Step 8

  • Completely remove the battery out of its position.

Completely remove the battery out of its position.

Step 9

  • Remove the five Phillips #0 screws that are on the border of the laptop.
  • Disconnect the white wire that is below the fan.

Remove the five Phillips #0 screws that are on the border of the laptop.

Disconnect the white wire that is below the fan.

Step 10

  • Flip all of the circuits upwards.
  • Remove all Phillips #0 screws.
  • Remove the keyboard.

Flip all of the circuits upwards.

Remove all Phillips #0 screws.

Remove the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Brian Jimenez

Member since: 09/18/2018

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of North Texas, Team S3-G3, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S3-G3, Raign Fall 2018 



                    UNT-RAIGN-F18S3G3                     


                                            4 Members                     


                                            6 Guides authored