Difficulty

Easy

Steps

4

Time Required

                          10 - 15 minutes            

Sections

1

  • Screen
  • 4 steps

Flags

0

  • BackAcer Aspire S3-391-6046

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen               
  • Slide the plastic opening tool underneath the frame of your device.
  • Slide the plastic opening tool all around the frame until the entire frame becomes loose and comes off.

Slide the plastic opening tool underneath the frame of your device.

Slide the plastic opening tool all around the frame until the entire frame becomes loose and comes off.

1024

Step 2

  • On the bottom left of the screen there is a black cable with a piece of white tape over it. Remove the white tape by peeling it off.
  • Slide your opening tool underneath the front of the cable, and pull the cable upwards to disconnect it from its socket.

On the bottom left of the screen there is a black cable with a piece of white tape over it. Remove the white tape by peeling it off.

Slide your opening tool underneath the front of the cable, and pull the cable upwards to disconnect it from its socket.

Step 3

  • Peel the silver tape from the corner of your laptop until it fully comes off.

Peel the silver tape from the corner of your laptop until it fully comes off.

Step 4

  • Remove the screen by grabbing the edges of the screen and pulling forward.

Remove the screen by grabbing the edges of the screen and pulling forward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Brian Rodriguez                     

Member since: 09/18/2018

506 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       University of North Texas, Team S3-G3, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S3-G3, Raign Fall 2018 



                    UNT-RAIGN-F18S3G3                     


                                            4 Members                     


                                            6 Guides authored                     

Coolboy_Awesome - Dec 30, 2019

Reply

Hi! Apparently three films came off with the LCD. Clear,gray and black what are they?

M Geyer - May 8, 2021

Reply

Thank you. Excellent instructions allowing me to replace LCD ribbon