Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Screen
- 5 steps
Flags
0
BackAcer Aspire S3-951-6432
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Use the plastic opening tool around the edges of the screen and remove the outer screen casing (the bezel).
Use the plastic opening tool around the edges of the screen and remove the outer screen casing (the bezel).
1024
Step 2
- Locate the black strip at the bottom of the screen, just above the power button.
- Use the spudger to disconnect this wire from the screen.
Locate the black strip at the bottom of the screen, just above the power button.
Use the spudger to disconnect this wire from the screen.
Step 3
- Disconnect the wire leading around the screen with a spudger or a plastic opening tool.
Disconnect the wire leading around the screen with a spudger or a plastic opening tool.
Step 4
- Locate the six 3 mm screws (there are three on each side of the screen). Remove them with the Phillips #0 screwdriver.
Locate the six 3 mm screws (there are three on each side of the screen). Remove them with the Phillips #0 screwdriver.
Step 5
- Pull the screen (the entire top half) backwards off the hinges of the laptop.
Pull the screen (the entire top half) backwards off the hinges of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Cynthia Bennett
Member since: 10/17/2018
569 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
UW Tacoma, Team S1-G1, Rose Fall 2018
Member of UW Tacoma, Team S1-G1, Rose Fall 2018
UWT-ROSE-F18S1G1
4 Members
5 Guides authored
