Difficulty

Moderate

Steps

9

Time Required

                          15 minutes

Sections

5

  • Back Cover
  • 1 step
  • Motherboard
  • 3 steps
  • Speakers
  • 2 steps
  • Battery
  • 1 step
  • Keyboard
  • 2 steps

Flags

0

  • BackAcer Aspire S3 MS2346

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the 12 5mm Phillips #00 screws.
  • Use a plastic opening tool to gently pry open the back panel.
  • Gently lift up the back panel, exposing the internals of the laptop.

Remove the 12 5mm Phillips #00 screws.

Use a plastic opening tool to gently pry open the back panel.

Gently lift up the back panel, exposing the internals of the laptop.

1024

Step 2

              Motherboard
  • Remove the motherboard connector cables by gently lifting the black latch that clamps them in place with a spudger or simply pull the connector from the port.

Remove the motherboard connector cables by gently lifting the black latch that clamps them in place with a spudger or simply pull the connector from the port.

Step 3

  • Remove the 5 5mm PH0 screws holding the motherboard in place.
  • Gently remove the motherboard from the chassis.

Remove the 5 5mm PH0 screws holding the motherboard in place.

Gently remove the motherboard from the chassis.

Step 4

  • Gently remove the motherboard.

Gently remove the motherboard.

Step 5

              Speakers
  • Unscrew the 4 1mm PH00 screws attaching the speakers to the frame.

Unscrew the 4 1mm PH00 screws attaching the speakers to the frame.

Step 6

  • Gently remove the speakers. Note that the wire connecting them may be lightly glued down. If so, gently pry up.

Gently remove the speakers. Note that the wire connecting them may be lightly glued down. If so, gently pry up.

Step 7

              Battery
  • Gently lift the battery from the frame.

Gently lift the battery from the frame.

Step 8

              Keyboard
  • The 30 1mm PH000 screws holding the keyboard in place will be distributed all over the back.
  • You will need to gently pry up the black tape to expose the remaining screws.

The 30 1mm PH000 screws holding the keyboard in place will be distributed all over the back.

You will need to gently pry up the black tape to expose the remaining screws.

Step 9

  • Gently lift the board exposing the keyboard assembly.

Gently lift the board exposing the keyboard assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Nikolas I Steckley

Member since: 09/17/2018

642 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Washington State, Team S1-G4, Hope Fall 2018                        

                                                  Member of Washington State, Team S1-G4, Hope Fall 2018 



                    WSU-HOPE-F18S1G4                     


                                            3 Members                     


                                            6 Guides authored