Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
2
- Back Cover
- 1 step
- Speakers
- 2 steps
Flags
0
BackAcer Aspire S3 MS2346
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the 12 5mm Phillips #00 screws.
- Use a plastic opening tool to gently pry open the back panel.
- Gently lift up the back panel, exposing the internals of the laptop.
Remove the 12 5mm Phillips #00 screws.
Use a plastic opening tool to gently pry open the back panel.
Gently lift up the back panel, exposing the internals of the laptop.
1024
Step 2
Speakers
- Unscrew the 4 1mm PH00 screws attaching the speakers to the frame.
Unscrew the 4 1mm PH00 screws attaching the speakers to the frame.
Step 3
- Gently remove the speakers. Note that the wire connecting them may be lightly glued down. If so, gently pry up.
Gently remove the speakers. Note that the wire connecting them may be lightly glued down. If so, gently pry up.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Nikolas I Steckley
Member since: 09/17/2018
642 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Washington State, Team S1-G4, Hope Fall 2018
Member of Washington State, Team S1-G4, Hope Fall 2018
WSU-HOPE-F18S1G4
3 Members
6 Guides authored
