Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackAcer Aspire S7-392-6484
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove all marked 3mm screws from the back panel of the device using a T6 Torx screwdriver.
- Remove the orange marked screws using a T6 Torx screwdriver. Note that these screws are 4mm in length.
- After all marked screws have been removed, lift up back panel to expose internal parts.
Remove all marked 3mm screws from the back panel of the device using a T6 Torx screwdriver.
Remove the orange marked screws using a T6 Torx screwdriver. Note that these screws are 4mm in length.
After all marked screws have been removed, lift up back panel to expose internal parts.
1024
Step 2
- Unscrew the marked 1.5 mm screws with a Phillips #01 screwdriver.
Unscrew the marked 1.5 mm screws with a Phillips #01 screwdriver.
Step 3
- Disconnect the cable located at the top of the battery. Be careful to pull the cable horizontally, not vertically.
Disconnect the cable located at the top of the battery. Be careful to pull the cable horizontally, not vertically.
Step 4
- Remove the battery.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Nicholas Wise
Member since: 02/14/2018
697 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S2-G6, Eyestone Spring 2018
Member of USF Tampa, Team S2-G6, Eyestone Spring 2018
USFT-EYESTONE-S18S2G6
3 Members
5 Guides authored