Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Trackpad
- 5 steps
Flags
0
BackAcer Aspire Switch 10 SW5-012-18MY
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Trackpad
- Remove the 8, 5.25 mm screws on the back cover using the screwdriver.
- Insert the opening tool into the USB port.
- Carefully remove the back cover with the opening tool.
Remove the 8, 5.25 mm screws on the back cover using the screwdriver.
Insert the opening tool into the USB port.
Carefully remove the back cover with the opening tool.
1024
Step 2
- Lift up on the ZIF connector that secures the ribbon cable using the opening tool.
- Pull the ribbon cable free.
Lift up on the ZIF connector that secures the ribbon cable using the opening tool.
Pull the ribbon cable free.
Step 3
- Remove the 4, 2.5 mm screws from the trackpad cover.
Remove the 4, 2.5 mm screws from the trackpad cover.
Step 4
- Remove the metal piece that secures the trackpad cover in place using the opening tool.
Remove the metal piece that secures the trackpad cover in place using the opening tool.
Step 5
- Remove the trackpad using the opening tool and your hands.
Remove the trackpad using the opening tool and your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Grecia Corrada
Member since: 03/19/2018
1,092 Reputation
6 Guides authored
Badges:
7
+4 more badges
Team
Baylor, Team S3-G3, Williams Spring 2018
Member of Baylor, Team S3-G3, Williams Spring 2018
BU-WILLIAMS-S18S3G3
3 Members
6 Guides authored
