Acer Aspire Timelinex 4820T 6645 Hard Drive Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          5 - 15 minutes            

Sections

2

• Battery
• 3 steps
• Hard Drive
• 4 steps

Flags

0

• BackAcer Aspire TimelineX 4820T-6645

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Power down the laptop.
• Turn the laptop over so the bottom is facing up and the battery is facing towards you.

Power down the laptop.

Turn the laptop over so the bottom is facing up and the battery is facing towards you.

1024

Step 2

• The tab on the right is a locking tab. Slide this tab to the right to unlock it (the red should now be showing).
• Slide the left tab to the left and hold it there.

The tab on the right is a locking tab. Slide this tab to the right to unlock it (the red should now be showing).

Slide the left tab to the left and hold it there.

Step 3

• While holding the left tab to the left the battery should easily pull out of the laptop.

While holding the left tab to the left the battery should easily pull out of the laptop.

Step 4

              Hard Drive               

• Place laptop bottom side up, and use a Phillips #1 screwdriver to unscrew the five 8 mm screws from the back panel.

Place laptop bottom side up, and use a Phillips #1 screwdriver to unscrew the five 8 mm screws from the back panel.

Step 5

• After removing the back panel, use a Phillips #1 screwdriver to unscrew the two 8 mm screws that hold the retaining piece to the frame.

After removing the back panel, use a Phillips #1 screwdriver to unscrew the two 8 mm screws that hold the retaining piece to the frame.

Step 6

• Pull the plastic tab toward the frame to disconnect the hard drive SATA.

Pull the plastic tab toward the frame to disconnect the hard drive SATA.

Step 7

• Remove the hard drive from the laptop, and use a Phillips #1 screwdriver to unscrew the two 3 mm screws that secure the retaining piece to the hard drive.

Remove the hard drive from the laptop, and use a Phillips #1 screwdriver to unscrew the two 3 mm screws that secure the retaining piece to the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Ian Smiley                     

Member since: 03/26/2019

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team S4-G3, Valliere Spring 2019                        

                                                  Member of UMass Dartmouth, Team S4-G3, Valliere Spring 2019 



                    UMASSD-VALLIERE-S19S4G3                     


                                            4 Members                     


                                            4 Guides authored