Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

2

  • Lower Back Panel
  • 1 step
  • Keyboard
  • 4 steps

Flags

0

  • BackAcer Aspire TimelineX 4830T-6682

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Back Panel
  • Remove the single screw with a Phillips #0 screwdriver.
  • Use a plastic opening tool on the upper part of the panel to remove it and access the RAM.
  • The other way to remove the panel is by sliding it away from the laptop. The difficulty of sliding it depends on the condition of your laptop.

Remove the single screw with a Phillips #0 screwdriver.

Use a plastic opening tool on the upper part of the panel to remove it and access the RAM.

The other way to remove the panel is by sliding it away from the laptop. The difficulty of sliding it depends on the condition of your laptop.

1024

Step 2

              Keyboard
  • Remove the eleven screws that hold that back panel to the laptop using a J0 Phillips screwdriver bit.

Remove the eleven screws that hold that back panel to the laptop using a J0 Phillips screwdriver bit.

Step 3

  • Place the laptop in the upright position, the lower front touchpad panel should be easily detatched at this point.
  • Remove the lower front touchpad panel by using an angled tweezers to disconnect the only wired tape connected to the motherboard.

Place the laptop in the upright position, the lower front touchpad panel should be easily detatched at this point.

Remove the lower front touchpad panel by using an angled tweezers to disconnect the only wired tape connected to the motherboard.

Step 4

  • Next, disconnect the 4 wired tapes of the keyboard from the motherboard just like we did with the lower front touchpad panel.

Next, disconnect the 4 wired tapes of the keyboard from the motherboard just like we did with the lower front touchpad panel.

Step 5

  • Finally, using an opening tool, gently pry along the edge of the keyboard to separate it from the laptop.

Finally, using an opening tool, gently pry along the edge of the keyboard to separate it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Tai H Nguyen

Member since: 09/25/2017

260 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of North Texas, Team S3-G6, Thompson Fall 2017                        

                                                  Member of University of North Texas, Team S3-G6, Thompson Fall 2017 



                    UNT-THOMPSON-F17S3G6                     


                                            4 Members                     


                                            5 Guides authored