Difficulty
Easy
Steps
13
Time Required
10 minutes
Sections
1
- Battery
- 13 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackAcer Aspire V3-472p-324J
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- First you will flip your laptop upside down so the battery side is facing up.
First you will flip your laptop upside down so the battery side is facing up.
1024
Step 2
- Once upside down, you will find the battery here.
Once upside down, you will find the battery here.
Step 3
- In order to access the battery you will need to remove the 18 5mm screws. Using your Phillips J1 bit remove the screws.
In order to access the battery you will need to remove the 18 5mm screws. Using your Phillips J1 bit remove the screws.
Step 4
- Stand your laptop up on its side to find the seams.
Stand your laptop up on its side to find the seams.
Step 5
- Carefully insert your plastic opening tool into the seam and move up and down to separate the back panel from the front. Repeat this process all around the laptop until all sides have been separated.
Carefully insert your plastic opening tool into the seam and move up and down to separate the back panel from the front. Repeat this process all around the laptop until all sides have been separated.
Step 6
- Remove the bottom plastic panel from the top.
Remove the bottom plastic panel from the top.
Step 7
- Locate the laptop speaker connector.
Locate the laptop speaker connector.
Step 8
- Gently remove the speaker connector.
Gently remove the speaker connector.
Step 9
- Once you have disconnected the speakers you will now have two separate pieces.
Once you have disconnected the speakers you will now have two separate pieces.
Step 10
- The battery is located on the bottom panel.
The battery is located on the bottom panel.
Step 11
- Use the plastic lever here and slide it to the side.
Use the plastic lever here and slide it to the side.
Step 12
- While holding the plastic lever, gently separate the battery from the bottom panel of the laptop.
While holding the plastic lever, gently separate the battery from the bottom panel of the laptop.
Step 13
- Take the old battery and dispose per manufacturers website.
Take the old battery and dispose per manufacturers website.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Chris Arnone
Member since: 10/17/2015
364 Reputation
1 Guide authored
Badges:
11
+8 more badges
Team
Gateway, Team 1-5, Kuhn Fall 2015
Member of Gateway, Team 1-5, Kuhn Fall 2015
GCC-KUHN-F15S1G5
1 Member
1 Guide authored
darren - Jun 10, 2017
Reply
You don’t have to remove the cover to remove the battery. Step 11 can be done with the cover on. Slide the switch over. Battery pops right out.
oewxiblrjrffklkifb@ttirv.net - Jul 2, 2020
Reply
Yes don’t need to take cover off -battery can be removed by using a pen/screwdriver to slide the tab to the side & battery releases.
It has a very small image of an arrow with a pen next to it. Very misleading (I tried to push it in first!)
If you wiggle the battery, you can see the battery release tab moves with it :-)
