Difficulty

Easy

Steps

8

Time Required

                          5 minutes

Sections

3

  • Battery
  • 4 steps
  • Cover
  • 2 steps
  • RAM
  • 2 steps

Flags

0

  • BackAcer Aspire V5-131-2629

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Is your laptop slow and sluggish while performing small tasks? Replacing and upgrading your RAM can increase the speed of your laptop for easy multitasking. Getting more RAM will boost the overall performance of your laptop. Follow this simple 6 step guide to replace your RAM and give your computer a boost in no time!

Unfortunately, the Acer website has taken down information regarding this device. However, a basic, rather informal summary of the details and specs can be found at the following link:

++Acer Aspire V5-131-2629 prices and specs++

A general disassembly tutorial of the device can be found:

++How to Disassemble the Acer Aspire V5 131++

Outside Resources-

The link to replacement RAM can be found at:

++Acer Aspire V5 131-2629 RAM Replacement++

What you need

Step 1

              Battery
  • Carefully turn your Acer Aspire V5-131-2629 upside down, so that the battery cell is visible and nearest to you.

Carefully turn your Acer Aspire V5-131-2629 upside down, so that the battery cell is visible and nearest to you.

1024

Step 2

  • Identify the small, oval slide switch on the left hand side of the laptop, directly above the battery.

Identify the small, oval slide switch on the left hand side of the laptop, directly above the battery.

Step 3

  • Insert an opening tool into the hole on the right side of the oval switch. Use the opening tool to slide the switch to the right.

Insert an opening tool into the hole on the right side of the oval switch. Use the opening tool to slide the switch to the right.

Step 4

  • With the switch engaged to the right, firmly pull the battery out and towards yourself, parallel to your work surface.

With the switch engaged to the right, firmly pull the battery out and towards yourself, parallel to your work surface.

Step 5

              Cover
  • Remove the single Phillips #0 screw from the cover on the underside of the laptop.

Remove the single Phillips #0 screw from the cover on the underside of the laptop.

Step 6

  • Remove the cover by sliding it outwards and remove it from the device.

Remove the cover by sliding it outwards and remove it from the device.

Step 7

              RAM
  • Using your finger, press the small tab on each side of the memory card.
  • The memory card will eject at a 45 degree angle.

Using your finger, press the small tab on each side of the memory card.

The memory card will eject at a 45 degree angle.

Step 8

  • Pull the memory cards out from the laptop.

Pull the memory cards out from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Nicholas Vassiliadis

Member since: 10/25/2019

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S1-G3, O'Connell Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G3, O'Connell Fall 2019 



                    UMASSD-O'CONNELL-F19S1G3                     


                                            3 Members                     


                                            12 Guides authored