Difficulty
Moderate
Steps
3
Time Required
25 minutes
Sections
1
- Screen
- 3 steps
Flags
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackAcer Aspire V5-473P-5602
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If your display is flickering, it means your laptop may have a loose display connector. This is something not to worry about—by simply securing this connector in place your display can start to show images correctly again.
This page will guide you step by step on how to correctly replace a screen.
What you need
Step 1
Screen
- Place a suction cup on the screen.
- Insert an iFixit opening tool into the plastic bezel frame.
- Work your way around slowly until the bezel is removed.
Place a suction cup on the screen.
Insert an iFixit opening tool into the plastic bezel frame.
Work your way around slowly until the bezel is removed.
1024
Step 2
- Detach the three different connectors located on the back of the screen.
Detach the three different connectors located on the back of the screen.
Step 3
- To remove the screen from the bezel frame, cut the tape around the display using a spudger.
- The screen is attached with a strong adhesive tape. Applying heat may make the removal process easier.
To remove the screen from the bezel frame, cut the tape around the display using a spudger.
The screen is attached with a strong adhesive tape. Applying heat may make the removal process easier.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Patricio Valdés
Member since: 01/29/2020
97 Reputation
1 Guide authored
Badges:
2
Team
York University, Team S8-G6, Turner Winter 2020
Member of York University, Team S8-G6, Turner Winter 2020
YORK-TURNER-W20S8G6
5 Members
16 Guides authored