Acer Aspire V5 571P 6609 Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Keyboard
4 steps

Flags

BackACER Aspire V5-571P-6609
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

Remember to apply anti-static measures. Power off the laptop completely. Remove the battery by turning laptop over and laying flat on a non-static surface. Note the location of the sliding battery release seen here.
Using a screwdriver or similar tool, slide release latch to the left to release the battery.
Once battery is released by the latch, gently pull battery away from main body of laptop.

Remember to apply anti-static measures. Power off the laptop completely. Remove the battery by turning laptop over and laying flat on a non-static surface. Note the location of the sliding battery release seen here.

Using a screwdriver or similar tool, slide release latch to the left to release the battery.

Once battery is released by the latch, gently pull battery away from main body of laptop.

1024

Step 2

Remove the two Phillips #0 screws.
Flip the laptop right side up and open the lid.

Remove the two Phillips #0 screws.

Flip the laptop right side up and open the lid.

Step 3

Open the laptop and place on flat, non-static surface. Using your Jimmy tool, slide the edge of the tool between the top of the keyboard and the outer panel and gently pop top tabs out of place. Remember to carefully detach the two flex cables before fully lifting keyboard out in order to avoid cable damage.

Open the laptop and place on flat, non-static surface. Using your Jimmy tool, slide the edge of the tool between the top of the keyboard and the outer panel and gently pop top tabs out of place. Remember to carefully detach the two flex cables before fully lifting keyboard out in order to avoid cable damage.

Step 4

Remember to reattach the two flex cables on the back of the keyboard to these ports during reassembly. The larger will fit in the white port on the right and the smaller backlight cable will fit in the smaller port to the immediate left of the white port.

Remember to reattach the two flex cables on the back of the keyboard to these ports during reassembly. The larger will fit in the white port on the right and the smaller backlight cable will fit in the smaller port to the immediate left of the white port.

To reassemble your device, place keyboard back into place by gently inserting bottom tabs downward and away from display, and popping top tabs back into place with a small amount of pressure. Reinsert battery by gently pushing battery back into place.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Kevin Sipple

Member since: 08/25/2022

355 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Gateway, Team 1-1, Pee Fall 2022                        

                                                  Member of Gateway, Team 1-1, Pee Fall 2022 



                    GCC-PEE-F22S1G1                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team