Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Keyboard
  • 3 steps
  • Charging Port
  • 7 steps

Flags

0

  • BackAcer Aspire V5-571P-6815

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off the computer and unplug all power.

Turn off the computer and unplug all power.

1024

Step 2

  • Slide the locking latch to the right and hold while pulling the battery out with your other hand.

Slide the locking latch to the right and hold while pulling the battery out with your other hand.

Step 3

              Keyboard
  • Remove the two 7mm Phillips #00 screws from the bottom of the laptop.

Remove the two 7mm Phillips #00 screws from the bottom of the laptop.

Step 4

  • Insert a plastic opening tool underneath the keyboard and pry upwards.
  • Slide the plastic opening tool around the perimeter to free the keyboard.
  • Flip the keyboard over and onto the palm rest.

Insert a plastic opening tool underneath the keyboard and pry upwards.

Slide the plastic opening tool around the perimeter to free the keyboard.

Flip the keyboard over and onto the palm rest.

Step 5

  • Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
  • Pull the ribbon cable out of the socket.
  • Remove the keyboard from the laptop.

Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

Pull the ribbon cable out of the socket.

Remove the keyboard from the laptop.

Step 6

              Charging Port
  • Remove the six 6mm Phillips #0 screws from underneath the keyboard.

Remove the six 6mm Phillips #0 screws from underneath the keyboard.

Step 7

  • Remove the sixteen 6mm Phillips #0 screws from the bottom cover.

Remove the sixteen 6mm Phillips #0 screws from the bottom cover.

Step 8

  • Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.
  • Pull the ribbon cable from the socket.

Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.

Pull the ribbon cable from the socket.

Step 9

Step 10

  • Use a plastic opening tool to pry up the palm rest from the laptop body.
  • Remove the palm rest from the laptop.

Use a plastic opening tool to pry up the palm rest from the laptop body.

Remove the palm rest from the laptop.

Step 11

  • Disconnect the charging port cable from the motherboard.
  • You might have to remove some electrical tape that is in the way.

Disconnect the charging port cable from the motherboard.

You might have to remove some electrical tape that is in the way.

Step 12

  • Lift the charging port up and out of the laptop.

Lift the charging port up and out of the laptop.

Follow the steps in reverse with a new cable.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Gordon Tran

Member since: 04/12/2018

225 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UW Tacoma, Team S1-G4, Liner Spring 2018                        

                                                  Member of UW Tacoma, Team S1-G4, Liner Spring 2018 



                    UWT-LINER-S18S1G4                     


                                            5 Members                     


                                            8 Guides authored