Acer Aspire V5 572 V5 572G Loudspeakers And Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

• Bottom Cover
• 4 steps
• Battery
• 2 steps
• Loudspeakers and Microphone
• 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackAcer Aspire V5-572, V5-572G

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

How to disassemble the Laptop and change the Loudspeaker modules.

What you need

Video Overview

Step 1

              Bottom Cover               

• Switch-off the Laptop.
• Remove the seventeen Philips #0 screws.

Switch-off the Laptop.

Remove the seventeen Philips #0 screws.

1024

Step 2

• If there is a plastic storage tray in the laptop, remove it.

If there is a plastic storage tray in the laptop, remove it.

Step 3

• Starting from the SD Memory Card hole, start prying between the top and bottom cases.
• Use plastic tools to avoid damaging the cover.
• Remove the bottom case.

Starting from the SD Memory Card hole, start prying between the top and bottom cases.

Use plastic tools to avoid damaging the cover.

Remove the bottom case.

Step 4

• Disconnect the battery immediately for a safer repair.
• Pull the battery connector away from the hard drive to disconnect it.

Disconnect the battery immediately for a safer repair.

Pull the battery connector away from the hard drive to disconnect it.

Step 5

              Battery               

• Remove the single Phillips 0 screw securing the battery.

Remove the single Phillips 0 screw securing the battery.

Step 6

• Remove the battery

Remove the battery

Step 7

              Loudspeakers and Microphone               

• Disconnect the Loudspeakers cable.
• There are two modules with loudspeakers, connected with one wire.
• Unscrew the screws and remove the Loudspeaker modules together with the cable.

Disconnect the Loudspeakers cable.

There are two modules with loudspeakers, connected with one wire.

Unscrew the screws and remove the Loudspeaker modules together with the cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored