Difficulty
Easy
Steps
6
Time Required
6 - 10 minutes
Sections
2
- Acer Aspire V5-591G-75KE Disassembly
- 4 steps
- Laptop Battery
- 2 steps
Flags
0
BackAcer Aspire V5-591G-75KE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Acer Aspire V5-591G-75KE Disassembly
- Close down the display and flip the device upside down.
- Use a Phillips #1 screwdriver to remove 18 black 10mm Phillips Head screws in order to loosen up the protective bottom casing.
Close down the display and flip the device upside down.
Use a Phillips #1 screwdriver to remove 18 black 10mm Phillips Head screws in order to loosen up the protective bottom casing.
1024
Step 2
- With the screws removed, flip the device right-side up and open up the display.
- Run a plastic spudger tool along the seam of the face-plate in order to loosen up the protective bottom casing.
- Popping sounds are normal, but forceful prying can damage delicate components. Be especially careful near the USB and HDMI ports.
With the screws removed, flip the device right-side up and open up the display.
Run a plastic spudger tool along the seam of the face-plate in order to loosen up the protective bottom casing.
Popping sounds are normal, but forceful prying can damage delicate components. Be especially careful near the USB and HDMI ports.
Step 3
- Close the display down once more, and flip the laptop upside down, with the hinge facing away from you.
- Do not yank the bottom casing off. There is a small speaker wire that connects it to the motherboard.
- Taking note of the small speaker wire, gently lift only the left side of the bottom casing.
Close the display down once more, and flip the laptop upside down, with the hinge facing away from you.
Do not yank the bottom casing off. There is a small speaker wire that connects it to the motherboard.
Taking note of the small speaker wire, gently lift only the left side of the bottom casing.
Step 4
- Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard.
- The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.
Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard.
The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.
Step 5
Laptop Battery
- The laptop battery is the black rectangular item at the top.
- The battery connects to the motherboard via a multi-colored 8-pin connector.
- Using a pair of blunt tweezers, push the white tabs on the sides 8-pin connector to disconnect the battery from the motherboard.
The laptop battery is the black rectangular item at the top.
The battery connects to the motherboard via a multi-colored 8-pin connector.
Using a pair of blunt tweezers, push the white tabs on the sides 8-pin connector to disconnect the battery from the motherboard.
Step 6
- Lift the battery directly up to remove it from the laptop. It is not screwed on.
Lift the battery directly up to remove it from the laptop. It is not screwed on.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Tasier Hagler
Member since: 10/18/2017
422 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
UW Tacoma, Team S3-G5, Liner Fall 2017
Member of UW Tacoma, Team S3-G5, Liner Fall 2017
UWT-LINER-F17S3G5
4 Members
18 Guides authored
