Difficulty

Moderate

Steps

10

Time Required

                          10 minutes

Sections

3

  • Back Cover
  • 4 steps
  • Battery
  • 3 steps
  • Speaker
  • 3 steps

Flags

0

  • BackAcer Chromebook 14 CB3-431-C3WS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Consider looking at the troubleshooting page to see if there may be a simpler solution.

What you need

Step 1

              Back Cover
  • Remove the two 6mm JIS #0 screws from either side of the hinges.

Remove the two 6mm JIS #0 screws from either side of the hinges.

1024

Step 2

  • Remove the eight 4mm JIS #0 screws from the back cover.

Remove the eight 4mm JIS #0 screws from the back cover.

Step 3

  • Insert an opening pick between the back panel and the sides of the computer to begin lifting the back off.
  • There are several clips holding the cover in place.
  • After the sides have been lifted, use the opening tool to finish opening the back cover.

Insert an opening pick between the back panel and the sides of the computer to begin lifting the back off.

There are several clips holding the cover in place.

After the sides have been lifted, use the opening tool to finish opening the back cover.

Step 4

  • Lift off the back cover.

Lift off the back cover.

Step 5

              Battery
  • Remove the two JIS #0 screws that connect the battery to the rest of the laptop.

Remove the two JIS #0 screws that connect the battery to the rest of the laptop.

Step 6

  • Pull the white tab connected to the battery out of the black tab that connects to the motherboard.
  • It is extremely important that this is done carefully and slowly to avoid causing damage to the motherboard.

Pull the white tab connected to the battery out of the black tab that connects to the motherboard.

It is extremely important that this is done carefully and slowly to avoid causing damage to the motherboard.

Step 7

  • Lift the battery out gently.

Lift the battery out gently.

Step 8

              Speaker
  • Remove the four 4mm JIS #0 screws that hold the speakers in place.

Remove the four 4mm JIS #0 screws that hold the speakers in place.

Step 9

  • Disconnect the clip that connects the speaker wires to the daughterboard.

Disconnect the clip that connects the speaker wires to the daughterboard.

Step 10

  • Lift the speakers from the frame, making sure to carefully unwind the wires connecting the speakers.

Lift the speakers from the frame, making sure to carefully unwind the wires connecting the speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Samantha Postma

Member since: 10/15/2019

1,160 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Grand Valley State University, Team S1-G3, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S1-G3, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S1G3                     


                                            5 Members                     


                                            6 Guides authored