Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

2

  • Battery
  • 5 steps
  • Speakers
  • 4 steps

Flags

0

  • BackAcer Chromebook 15 C910-C453

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the Chromebook onto its backside and unscrew the the following Phillips #1 screws:
  • Sixteen 5mm Phillips screws located around the border.
  • Two 5mm Phillips screws located in center.

Turn the Chromebook onto its backside and unscrew the the following Phillips #1 screws:

Sixteen 5mm Phillips screws located around the border.

Two 5mm Phillips screws located in center.

1024

Step 2

  • Remove the back cover by carefully prying each side with an iFixit Opening Tool.
  • Set aside back cover.

Remove the back cover by carefully prying each side with an iFixit Opening Tool.

Set aside back cover.

Step 3

  • Using a spudger, carefully unplug the rainbow wires connected to the top of the battery.

Using a spudger, carefully unplug the rainbow wires connected to the top of the battery.

Step 4

  • Unscrew the 4mm Phillips #1 screw located at the top right of battery.

Unscrew the 4mm Phillips #1 screw located at the top right of battery.

Step 5

  • Remove the battery.

Remove the battery.

Step 6

              Speakers
  • Before beginning hard drive replacement, the back cover should be taken off and the battery removed to ensure no power is connected.
  • Carefully eject the black ribbon from the white base by squeezing inward at the base and gently pulling backwards.
  • Gently pull black ribbon out.

Before beginning hard drive replacement, the back cover should be taken off and the battery removed to ensure no power is connected.

Carefully eject the black ribbon from the white base by squeezing inward at the base and gently pulling backwards.

Gently pull black ribbon out.

Step 7

  • Disconnect the black wires where the speakers are connected to the motherboard by pulling down on both sides with two iFixit Opening Tools.

Disconnect the black wires where the speakers are connected to the motherboard by pulling down on both sides with two iFixit Opening Tools.

Step 8

  • Gently pull the right speaker, FYHZRF-R, upward, unlatching it from its 2 rubber joints.
  • Repeat with left speaker, FYHZRF-L.

Gently pull the right speaker, FYHZRF-R, upward, unlatching it from its 2 rubber joints.

Repeat with left speaker, FYHZRF-L.

Step 9

  • Lift left and right speakers up and untangle the connecting wire from the metal notches.
  • Remove the speakers.

Lift left and right speakers up and untangle the connecting wire from the metal notches.

Remove the speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jacob Rakestraw

Member since: 04/17/2017

419 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S15-G1, Banghart Spring 2017                        

                                                  Member of Cal Poly, Team S15-G1, Banghart Spring 2017 



                    CPSU-BANGHART-S17S15G1                     


                                            5 Members                     


                                            11 Guides authored