Acer Chromebook 15 Cb3 532 C6T1 Wi Fi Card Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes            

Sections

1

• Wi-Fi Card
• 6 steps

Flags

0

• BackAcer Chromebook

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Prior to beginning the repair, be sure your Chromebook is powered off and is not plugged into the wall charger.

What you need

Step 1

              Wi-Fi Card               

• Place the device on a flat surface with the bottom facing upwards.

Place the device on a flat surface with the bottom facing upwards.

1024

Step 2

• Unscrew the eighteen 6 mm screws from bottom of the device using a Phillips #0 screwdriver.

Unscrew the eighteen 6 mm screws from bottom of the device using a Phillips #0 screwdriver.

Step 3

• With the plastic opening tool, pry along the edges of the bottom slowly to separate the back cover.
• Be careful not to damage or crack the back cover of the device.

With the plastic opening tool, pry along the edges of the bottom slowly to separate the back cover.

Be careful not to damage or crack the back cover of the device.

Step 4

• Carefully remove the back cover.

Carefully remove the back cover.

Step 5

• Locate the Wi-Fi card. It will be white chip beside the motherboard.
• Remove the 3 mm screw holding the Wi-Fi card in place using a Phillips #0 screwdriver.

Locate the Wi-Fi card. It will be white chip beside the motherboard.

Remove the 3 mm screw holding the Wi-Fi card in place using a Phillips #0 screwdriver.

Step 6

• Gently grab the edges of the Wi-Fi card and pull it out from the motherboard.
• Carefully remove the two coaxial antenna cables that attach the Wi-Fi card to the motherboard. One is black and the other is white.
• Have your new replacement Wi-Fi card ready to place back in the slot.

Gently grab the edges of the Wi-Fi card and pull it out from the motherboard.

Carefully remove the two coaxial antenna cables that attach the Wi-Fi card to the motherboard. One is black and the other is white.

Have your new replacement Wi-Fi card ready to place back in the slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Avinesh Mohanaranjan                     

Member since: 09/16/2021

183 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team E-17, Melo-Thaiss Fall 2021                        

                                                  Member of York University, Team E-17, Melo-Thaiss Fall 2021 



                    YORK-MELO-THAISS-F21SEG17                     


                                            1 Member                     


                                            2 Guides authored