Difficulty
Moderate
Steps
7
Time Required
2 minutes
Sections
2
- Back Cover
- 4 steps
- Battery
- 3 steps
Flags
0
BackAcer Chromebook 15 CB5-571-C09S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Place the device on a flat surface faced down so that the fan vents are at the top of the device.
Place the device on a flat surface faced down so that the fan vents are at the top of the device.
1024
Step 2
- Unscrew the eighteen 6 mm PH0 Phillips head screws from the back of the device.
Unscrew the eighteen 6 mm PH0 Phillips head screws from the back of the device.
Step 3
- Use a plastic opening tool to pry open the back cover around the edges of the device.
- Be careful not to crack or break the back cover of the device.
- You will have to adjust the position of the device to pry it open along all the edges.
Use a plastic opening tool to pry open the back cover around the edges of the device.
Be careful not to crack or break the back cover of the device.
You will have to adjust the position of the device to pry it open along all the edges.
Step 4
- Stand the device up with the hinges on top and carefully pull apart the back cover from the device.
Stand the device up with the hinges on top and carefully pull apart the back cover from the device.
Step 5
Battery
- The battery is the large black rectangle located in the bottom center of the device.
- Unscrew the single black 5 mm PH00 Phillips head screw holding the battery in place located at the top right corner of the battery.
The battery is the large black rectangle located in the bottom center of the device.
Unscrew the single black 5 mm PH00 Phillips head screw holding the battery in place located at the top right corner of the battery.
Step 6
- Disconnect the battery connector from the motherboard using two plastic opening tools.
- The battery connector is the white “plug” that connects the battery to the motherboard with rainbow colored wires attached to it.
- Use two of the plastic opening tools on either edge of the battery connector and carefully pull out the battery connector out from the motherboard.
Disconnect the battery connector from the motherboard using two plastic opening tools.
The battery connector is the white “plug” that connects the battery to the motherboard with rainbow colored wires attached to it.
Use two of the plastic opening tools on either edge of the battery connector and carefully pull out the battery connector out from the motherboard.
Step 7
- Once the battery has been disconnected from the motherboard it can easily be removed from the device.
- Grab the top edge of the battery and carefully pull it up and out of the device towards you.
Once the battery has been disconnected from the motherboard it can easily be removed from the device.
Grab the top edge of the battery and carefully pull it up and out of the device towards you.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 2 other contributors
Sakiynah Howard
Member since: 10/17/2017
1,000 Reputation
6 Guides authored
Badges:
14
+11 more badges
Team
UMass Dartmouth, Team S1-G3, Simcock Fall 2017
Member of UMass Dartmouth, Team S1-G3, Simcock Fall 2017
UMASSD-SIMCOCK-F17S1G3
3 Members
12 Guides authored
Kelly Robledo - Apr 6, 2019
Reply
Where do you get the plastic opening tools
Naomi Harrison - Jun 16, 2019
Reply
Instructions were perfect. Used a putty knife to pry off the back
