Acer Chromebook C710 2833 Fan Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 - 7 minutes            

Sections

1

• Fan
• 5 steps

Flags

0

• BackAcer Chromebook C710-2833

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Fan               

• Flip your Chromebook over so the bottom is facing up.

Flip your Chromebook over so the bottom is facing up.

1024

Step 2

• Locate the 6 mm Phillips #00 screw that holds the back cover together. Use your driver with the PH00 bit attached to unscrew it.
• Once completely unscrewed, carefully lift the cover off.
• Place the cover and screw safely to the side for now.

Locate the 6 mm Phillips #00 screw that holds the back cover together. Use your driver with the PH00 bit attached to unscrew it.

Once completely unscrewed, carefully lift the cover off.

Place the cover and screw safely to the side for now.

Step 3

• Now take your anti-static wrist strap and place it tightly on your wrist.
• Attach the alligator clamp of the wrist strap to something that will ground yourself to avoid possible electric zaps.
• The location chosen in the picture is recommended.

Now take your anti-static wrist strap and place it tightly on your wrist.

Attach the alligator clamp of the wrist strap to something that will ground yourself to avoid possible electric zaps.

The location chosen in the picture is recommended.

Step 4

• Locate the two 6 mm Phillips #00 screws on the fan port.
• Unscrew the two screws and place them aside for now.

Locate the two 6 mm Phillips #00 screws on the fan port.

Unscrew the two screws and place them aside for now.

Step 5

• Carefully remove the fan from its port. You may need to use a little force as there will be an adhesive on the right side of the fan keeping it in place.
• Locate the Molex cable connecting the fan to its port in the top left corner.
• Disconnect the cable.

Carefully remove the fan from its port. You may need to use a little force as there will be an adhesive on the right side of the fan keeping it in place.

Locate the Molex cable connecting the fan to its port in the top left corner.

Disconnect the cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Nicholas Latorre                     

Member since: 09/28/2017

558 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S1-G6, Nance Fall 2017                        

                                                  Member of USF Tampa, Team S1-G6, Nance Fall 2017 



                    USFT-NANCE-F17S1G6                     


                                            4 Members                     


                                            10 Guides authored