Difficulty

Moderate

Steps

7

Time Required

                          10 minutes            

Sections

3

  • Battery
  • 2 steps
  • Acer Chromebook C710-2847 Back Cover Replacement
  • 2 steps
  • Wireless Card
  • 3 steps

Flags

0

  • BackAcer Chromebook C710-2847

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Place the laptop on a flat surface with the bottom side facing up.
  • Place the tip of a spudger or finger into the hole on the battery release slider.

Place the laptop on a flat surface with the bottom side facing up.

Place the tip of a spudger or finger into the hole on the battery release slider.

1024

Step 2

  • Use the spudger to move the slider to the right and hold it there.
  • With the slider held, use your other hand to pull the battery back away from the laptop.

Use the spudger to move the slider to the right and hold it there.

With the slider held, use your other hand to pull the battery back away from the laptop.

Step 3

              Acer Chromebook C710-2847 Back Cover Replacement               
  • This step will void your device warranty.
  • Use the screwdriver to pierce the warranty sticker.
  • Unscrew and remove the #0 6mm Phillips screw and set it aside.

This step will void your device warranty.

Use the screwdriver to pierce the warranty sticker.

Unscrew and remove the #0 6mm Phillips screw and set it aside.

Step 4

  • Slide the back panel towards you. The best spots to place your fingers are on the bumpers.
  • Lift on the front edge to remove the panel.

Slide the back panel towards you. The best spots to place your fingers are on the bumpers.

Lift on the front edge to remove the panel.

Step 5

              Wireless Card               
  • Use a spudger or your fingernails to lift up and unclip the two gold connectors on the top of the wireless card.

Use a spudger or your fingernails to lift up and unclip the two gold connectors on the top of the wireless card.

Step 6

  • Unscrew the black #0 3mm Phillips screw at the top right of the wireless card.

Unscrew the black #0 3mm Phillips screw at the top right of the wireless card.

Step 7

  • The wireless card will spring up.
  • Pull the wireless card up and out to remove it.

The wireless card will spring up.

Pull the wireless card up and out to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Bradley Pavy                     

Member since: 09/30/2013

1,254 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 13-3, Forte Fall 2013                        

                                                  Member of Cal Poly, Team 13-3, Forte Fall 2013 



                    CPSU-FORTE-F13S13G3                     


                                            5 Members                     


                                            14 Guides authored                     

When Ze - Nov 13, 2018

Reply

If you replace the original wifi card, how do you get Chrome OS to recognize, or find and download driver for Intel AC 7260 wifi card?

Thanks.